EP-906 Hydro Static Epoxy Primer – 2 Part
Actech EP-906 Hydro Static Epoxy Primer is a two part water based epoxy polyamide barrier coating.
Actech EP-906 Hydro Static Epoxy Primer is approved for use with portable (drinking) water, independent
testing confirms conformity with the requirements of AS 4020.2000 and BS6920.
Actech EP-906 can be used as a primer/sealer on concrete, masonry, and other cementitious substrates.
The product forms a hydrostatic damp-proofing barrier thus allowing the application of other moisture
sensitive coatings. Actech EP-906 Hydro Static Epoxy Primer is non-flammable, negligible odour and can be
applied over green concrete that is not less than 15 days old. The product forms an excellent binder for
dusty and eroded concrete surfaces.
As a hydrostatic pressure resistant moisture barrier to protect against dampness penetration through to
the interior of walls and floors.
As a low water vapour transmission coating in the building and construction industries and as a
barrier/seal coating over damp concrete.
As a hydrostatic moisture barrier coating over damp, concrete prior to overcoating with conventional
levelling compounds, carpets and tile adhesives
As a barrier seal coating over damp or efflorescence producing concrete prior to overcoating with
conventional building paints.
As a hydrostatic moisture barrier on the negative side in below grade surfaces such as basements, tunnels,
lift wells, retaining walls and carparks