{"product_id":"actflex-900r-internal-1-4m-x-20m","title":"ACTFLEX 900R Internal 1.4m x 20m","description":"\u003cp\u003e\u003cstrong\u003eButyl sheet membrane for showers and bathrooms. Heat-welded laps, tile or screed 1 hour after install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eACTFLEX 900R is a heat-weldable butyl rubber sheet membrane for internal wet areas under tiles and screeds. Hot-air welded laps fuse the sheets into one continuous membrane you can probe-test. Factory-made at 0.9 mm, so there is no film build to check.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere to use it\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShowers, bathrooms, ensuites and laundries (AS 3740)\u003c\/li\u003e\n\u003cli\u003eUnder direct-stick tiles, fixed to the fabric face\u003c\/li\u003e\n\u003cli\u003eUnder bonded screeds: FORSPEC SCREEDX, FORCEM SCREED BINDER or ACTFLEX CRYSTAL BOND\u003c\/li\u003e\n\u003cli\u003eOver existing cured screeds primed with ACTFLEX EP250\u003c\/li\u003e\n\u003cli\u003eOver electric underfloor heating, cables fully encapsulated in FORSPEC screed or levelling compound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhy waterproofers buy it\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplies with AS\/NZS 4858. Cyclic movement pass, no fatigue\u003c\/li\u003e\n\u003cli\u003eOver 300% elongation. No fillet or bond breaker needed\u003c\/li\u003e\n\u003cli\u003eTile, screed or flood test 1 hour after installation\u003c\/li\u003e\n\u003cli\u003eFabric on both faces. Tiles and screed key to the top, the underside fully bonds with ACTFLEX 302 Adhesive, so no water tracking\u003c\/li\u003e\n\u003cli\u003eNo open flame. Hot-air welded only\u003c\/li\u003e\n\u003cli\u003eDetail with cut strips of the same sheet or ACTFLEX SA TAPE\u003c\/li\u003e\n\u003cli\u003e10 year Forspec product warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1.4 m x 20 m roll: 28 m² gross, 27.2 m² after the 40 mm welded side lap. Allow approx. 25-26 m² in practice for end laps, upturns, details and wastage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot for\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eExternal, below-grade or permanently UV-exposed work, or use as a wearing surface. Always cover it with tiles, screed or a similar protective finish. Apply at 5-35°C ambient only. Installation is restricted to applicators with current FORSPEC accreditation.\u003c\/p\u003e","brand":"Forspec Protective Coatings","offers":[{"title":"Default Title","offer_id":60069432754462,"sku":"AACT393","price":1400.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0749\/6197\/7630\/files\/forspec-actflex-900r_roll_angle_01.jpg?v=1790577546","url":"https:\/\/thewaterproofingshop.com.au\/products\/actflex-900r-internal-1-4m-x-20m","provider":"The Waterproofing Shop","version":"1.0","type":"link"}