Actech Protective Coatings

ACTFLEX POLYCRETE: Your Ultimate Screed Solution

ACTFLEX POLYCRETE: Your Ultimate Screed Solution

ACTFLEX POLYCRETE: Your Ultimate Screed Solution

Description: ACTFLEX POLYCRETE is a cutting-edge engineered blend of solvent polyurethane resin designed for robust structures with high-tensile strength. Its versatility extends to screeds, ramps, levelling compounds, and more.

This innovative solution boasts unparalleled versatility, durability, and efficiency, making it the go-to choice for engineers, architects, and contractors alike.

Unleashing Unprecedented Potential

ACTFLEX POLYCRETE isn't your run-of-the-mill screed additive—it's a marvel of modern engineering. With the ability to accommodate screeds from a mere 1mm to a substantial 80mm in a single application, it transcends conventional limitations. Imagine the time and effort saved by achieving optimal screed thickness in one go, without the hassle of multiple layers.

Main Benefit: One of its most significant advantages lies in its capability to serve as a bonded screed under 25mm thickness. This addresses a long-standing challenge in the industry, where achieving a bonded screed according to AS3740, AS4654, and NCC 2012 standards has been exceedingly difficult. With ACTFLEX POLYCRETE, this obstacle is now surmountable, providing a viable solution for various construction projects.

Adhesion Properties: Test results from accredited laboratories demonstrate the exceptional adhesion properties of ACTFLEX POLYCRETE when applied on top of waterproofing membranes. These results validate its reliability and suitability for diverse applications, ensuring a seamless and durable bond that meets industry standards.



  • Appearance: Translucent Gloss, Viscous Liquid
  • Odour: Minimal Solvent Odour
  • Solvent Resistant: Good
  • Toxicity: Dry Film is Not Toxic
  • Waterproof Time: 3 Hours at 25°C and 50% R.H
  • Coverage: 20L Resin/120kg Aggregate
  • Solids: 100%
  • Cure Time: 24 Hours
  • Full Strength: 7 Days
  • Mixing Ratio (Weight): 6:1 (6 Part Aggregate/1 Part Liquid Resin)

Mixing and Application:

  • Mix traditional sand and cement or aggregates with ACTFLEX POLYCRETE at a ratio of 6 parts aggregate to 1 part liquid resin.
  • Working time is 30-40 minutes after mixing.
  • Apply the mix with a steel float trowel, ensuring a smooth and even surface.
  • Coverage: 20kg of sand and cement mix with 3.3 litres of ACTFLEX POLYCRETE covers approximately 1 square meter at a 10mm thickness.

Drying and Curing:

  • Rapid drying: 4 hours at 25°C and 50% R.H.
  • Full cure: Achieved within 7 days.

Surface Preparation:

  • Inspect the substrate for defects and moisture levels.
  • If needed, grind or scarify the surface for a clean and level base.
  • Apply a compatible primer before screed application.

Industry Applications:

  • Ideal for automotive service bays, warehousing, food processing facilities, and more.
  • Engineered to provide durability and resistance to heavy loads.

Conclusion: ACTFLEX POLYCRETE stands as the pinnacle of screed additives, offering unmatched strength, versatility, and efficiency. With rapid drying and curing times, seamless application, and superior performance, it's the ultimate solution for your construction needs. Trust in ACTFLEX POLYCRETE to elevate your projects to new heights of excellence

Reading next


Leave a comment

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.