Coverage for Maximum Wear Resistance:
For the non-slip coating Synpave Sport & Rec Non-Slip Coating, apply each coat at a rate of 3 to 4 m² per litre for optimal wear resistance. Synpave Sport & Rec Non-Slip Coating is pre-mixed and ready to use. Ensure that Synpave Sport & Rec Non-Slip Coating is mixed thoroughly to achieve an even, smooth consistency before application. Apply the non-slip coating Synpave Sport & Rec Non-Slip Coating evenly with a medium nap roller or squeegee, followed immediately by light finishing (laying off) with a broom or brush.
For the best results, the second coat and any subsequent coats of the non-slip coating Synpave Sport & Rec Non-Slip Coating should be finished at a right angle to the previous coat. A squeegee finish with Synpave Sport & Rec Non-Slip Coating generally provides the maximum non-slip results. Apply a minimum of two coats of Synpave Sport & Rec Non-Slip Coating, allowing at least 2 hours of drying time between coats under good drying conditions (minimum 10°C and maximum 70% relative humidity, no rain). In cold, wet, or humid weather, allow additional time between coats of the non-slip coating Synpave Sport & Rec Non-Slip Coating.
Allow the non-slip coating Synpave Sport & Rec Non-Slip Coating to cure for a minimum of 4 hours before foot traffic or 2 days before vehicle traffic under good drying conditions (minimum 10°C and maximum 70% relative humidity, no rain). Clean equipment with water immediately after each coat of Synpave Sport & Rec Non-Slip Coating is applied while the material is still wet.
Synpave Sport & Rec Non-Slip Coating is recommended for both commercial and residential use. Common applications of the non-slip coating Synpave Sport & Rec Non-Slip Coating include car parks, rooftops, driveways, walkways, playgrounds, and similar areas around domestic, municipal, educational, and commercial buildings. The non-slip coating Synpave Sport & Rec Non-Slip Coating is also suitable for stair treads, decks, balconies, and ramps, and can be easily repaired or recoated after thorough cleaning.
The non-slip coating Synpave Sport & Rec Non-Slip Coating applied according to this bulletin meets the Australian Standard AS/NZS 4586:2013 for slip resistance. The non-slip coating Synpave Sport & Rec Non-Slip Coating achieves a Wet Pendulum P5 Classification (High) and Oil Wet Ramp result R13.
