Flood Test Balloon
$28.00
ACTFLEX 400 CLEAR Waterproofing Membrane
$66.00
Innovative Tools 230mm FC Sheeting Puddle Flange Recess Kit
$504.00
Soudal T-Rex Crystal
$17.85
Puddle Pro 90mm Puddle Flange
$15.00
Puddle Pro 100mm Puddle Flange
$15.00
BAT Spike Roller 21mm x 500mm
$55.00
ACTFLEX 400 CLEAR Temporary Leak Repair Kit For Leaking Bathrooms & Balconies
$94.35
Cart
0Your cart is empty
Let's get your project sorted - start with a system below.
The primer for ACTFLEX 75FC and 929 SL. One thin coat, tack free in 3 to 5 minutes.
ACTFLEX SUPERBOND 007 is a solvent-based, moisture-reactive polyurethane primer. It is the specified adhesion promoter ahead of ACTFLEX 75FC joint sealant and the ACTFLEX 929 SL membrane. One thin coat by brush, and you can overcoat in 10 to 15 minutes.
Where to use it
Why waterproofers buy it
Coverage
1 L covers approximately 4 to 12 m²: 8 to 12 m²/L on dense substrates, 4 to 8 m²/L on porous.
Joint priming: 80 to 130 linear metres per litre on a 15 mm joint, both flanks.
Not for
Hybrid and MS systems such as ACTFLEX 906 WPU and MS PRO (use SUPERPRIME 008). Not a membrane or moisture barrier. Not below 5°C or above 35°C. Do not dilute. Combustible, keep away from ignition sources. Professional use only.
All times at 25°C and 50% RH.
7-Day Money BackGuarantee
Fast DispatchNext Business Day
Expert Advice(02) 8021 3517
Secure CheckoutSSL EncryptedPickup available at The Waterproofing Shop
Usually ready in 24 hours
ACTFLEX SuperBond 007 PVC Universal Primer 1 Litre
1 Lt
The Waterproofing Shop
22/872 Canterbury Road
Roselands NSW 2196
Australia
Engineered to perform in the most demanding environments.
High performance negative pressure waterproofing for below ground structures.
ACTFLEX 989 CWP
ACTFLEX SUPERBOND
ACTFLEX MESHTAPE
Correct application makes all the difference.
For professional use only. Not a waterproofing membrane and not a moisture barrier. Preliminary testing on the actual production substrate is mandatory before use - plastics vary widely between manufacturers and grades, and materials prone to stress cracking must be tested first. Formulated for solvent-based products - for hybrid and MS systems, including ACTFLEX 906 WPU and ACTFLEX MS PRO, specify ACTFLEX SUPERPRIME 008. Apply once only, do not build multiple coats, and do not dilute or mix with any other substance. Do not apply below 5C or above 35C. Adequate UV protection is mandatory where used on transparent or translucent substrates. Discard immediately if gelling, separation or a significant increase in viscosity occurs. Classified a HAZARDOUS CHEMICAL and DANGEROUS GOODS, Poisons Schedule S6 - highly flammable liquid and vapour. Exclude all ignition sources and do not use or store in pits, depressions, basements or any area where vapours may be trapped.
| Membrane Classification | Solvent-based, moisture-reactive polyurethane primer |
| Chemical Base | Solvent-based polyurethane solution |
| System | Solvent-based FORSPEC products - ACTFLEX 75FC and ACTFLEX 929 SL |
| Colour | Clear to slightly yellow |
| Density | Approx. 0.90 g/cm3 (GB/T 13447.2)* |
| Solids Content | 30% (JC/T 408)* |
| Number of Coats | One coat only |
| Tack-Free Time | 3-5 minutes at 25C, 50% RH* |
| Fully Dry, Ready to Overcoat | 10-15 minutes at 25C, 50% RH* |
| Open Time Before Overcoating | Up to 2 hours at 25C, 50% RH* |
| Coverage | 8-12 m2/L on dense substrates; 4-8 m2/L on porous substrates* |
| Consumption Per Coat | Approx. 0.08-0.25 L/m2* |
| Joint Priming | Approx. 80-130 linear metres per litre on a 15 mm joint, two flanks primed* |
| Application Method | Brush, felt or foam applicator |
| Ideal Application Temperature | +15C to +25C |
| Application Temperature Range | +5C to +35C |
| Packaging | 1000 mL |
| Usable Period After Opening | One month with frequent use; two months with infrequent use |
| Shelf Life | 12 months, unopened, stored at 10-22C |
| Hazard Classification | Hazardous Chemical; Dangerous Goods; Poisons Schedule S6 |
| * Typical Forspec R&D characteristic values - no accredited test report is held for this product | |
Before
After
Gold Coast, QLD
Before
After
Sydney, NSW
Before
After
Perth, WA
Before
After
Melbourne, VIC
Brisbane, QLD
Step-by-step from prep to top coat. Filmed on the tools, not in a studio.
We supply premium waterproofing products backed by expert advice, fast service and real-world experience.
100% Australian
30+ Years in the
Thousands of Products
Fast Shipping
Expert TechnicalSuperBond 007 is a moisture-reactive primer that promotes adhesion between PVC and polyurethane sealants. Used for sealing PVC pipe penetrations, PVC waterstops, and bonding PU products to PVC, glass, aluminium, metal, timber, and other non-porous materials.
SuperBond 007 dries extremely fast - tack-free in 3-5 minutes at 23°C (some applications report 30-second flash). The fast dry lets you complete priming and sealant application in a single visit.
Apply a single thin coat directly to the substrate using a lint-free cloth or brush. Ready-to-use - no mixing or thinning. Solvent-based with 30% solids content, clear in appearance.
Apply between 5°C and 35°C ambient. The moisture-reactive cure works even in humid conditions - in fact, some humidity is required for proper cure. 12-month shelf life when stored sealed.
Primes substrates for ACTFLEX 75FC polyurethane sealant, MS Pro modified polyurethane, and other Forspec polyurethane joint sealants. Particularly important on smooth PVC where direct sealant adhesion can fail.
