Innovative Tools Grout Removal Blades
100mm cleaning blades for the Grout Buster 3000 in four thicknesses. Match the blade to the joint.
Innovative Tools Grout Removal Blades are the cleaning blades for the Grout Buster 3000 tile joint cleaning and cutting machine. Every blade is 100mm outer diameter with a 20mm bore and cuts to 11mm. Pick 1.2mm, 1.7mm, 2.2mm or 2.7mm.
What it's for
- Tile and wall joint cleaning with the Grout Buster 3000
- 1.2mm blade for 1.5mm joints, 1.7mm for 2.0mm, 2.2mm for 2.5mm, 2.7mm for 3.0mm
Why waterproofers buy it
- Direct replacement for the 1.2mm blade the machine ships with
- Four thicknesses, so the blade stays narrower than the joint
- 11mm depth, well past the 5mm minimum clean-out Innovative Tools recommend
Specs
100mm outer diameter, 20mm bore, 11mm cutting depth. When you change thickness, adjust the gasket behind the lower pressure plate so the blade centre lines up with the pointed wheel. Consumable, not covered by the machine warranty.
Not for
Joint cutting and expanding. That uses Innovative Tools' 105mm cutting blade, not these.
7-Day Money BackGuarantee
Fast DispatchNext Business Day
Expert Advice(02) 8021 3517
Secure CheckoutSSL EncryptedPickup available at The Waterproofing Shop
Usually ready in 24 hours
Innovative Tools Grout Removal Blades
1.2MM
The Waterproofing Shop
22/872 Canterbury Road
Roselands NSW 2196
Australia
Technical Specifications
Product Files
No documentation available for this product.
Technical Specifications
| Tool Type | Blade for cleaning, for the Innovative Tools tile joints cleaning and cutting machine |
| Outer Diameter | 100mm |
| Inner Diameter | 20mm |
| Thickness | 1.2mm, 1.7mm, 2.2mm or 2.7mm |
| Cutting Depth | 11mm |
| Factory Fitted Blade | The machine comes with a 1.2mm blade for cleaning |
| Blade To Joint Match | 1.2mm blade for 1.5mm joints, 1.7mm blade for 2.0mm joints, 2.2mm blade for 2.5mm joints, 2.7mm blade for 3.0mm joints |
| Minimum Cleaning Depth | Not less than 5mm |
| Gasket Adjustment | The thicker the blade, the smaller the gasket behind the lower pressure plate needs to be |
| Alignment | Blade centre must be in the same straight line as the pointed wheel centre |
| Warranty Status | Consumable wear part, excluded from the machine warranty |
The Waterproofing Shop?
We supply premium waterproofing products backed by expert advice, fast service and real-world experience.
100% AustralianOwned & Operated
30+ Years in theWaterproofing Industry
Thousands of Productsin Stock
Fast ShippingAustralia Wide
Expert TechnicalSupport