What is ACTFLEX Pigment Mica Powder used for?

ACTFLEX Pigment Mica Powder (20g) is a fine mica-based pigment added to clear epoxy floor coatings or topcoats to add sparkle, shimmer, and depth to decorative epoxy floor systems.

How much mica per epoxy?

Typical dose is 10-20g of mica per 5-10L of clear epoxy or topcoat. The 20g pack is sized for a small to medium decorative project. Stir thoroughly to evenly distribute the mica particles.

Can I combine mica with metallic paste?

Yes - many decorative epoxy floors combine ACTFLEX Metallic Epoxy Paste (for swirl patterns) with mica powder (for sparkle). Mix both pigments into the same wet epoxy batch before pouring.

Where can I add mica - basecoat or topcoat?

Mica can be added to the Crystal Coat epoxy basecoat (for in-floor sparkle) or to the Ultra Shield polyaspartic topcoat (for surface sparkle). Surface sparkle is more visible; in-floor sparkle is more subtle and has depth.

Will the sparkle dull over time?

Mica particles are encapsulated in the cured epoxy or polyaspartic and won't dull under normal wear. The Ultra Shield topcoat provides the UV protection and wear surface - the mica is permanently locked underneath.

ACTFLEX Pigment Mica Powder 20g

ACTFLEX Pigment Mica Powder 20gBLACK GREY

$7.00

Add it to your kit

Frequently bought together

This item

ACTFLEX Pigment Mica Powder 20g $7.00
Add

125mm Arrow Cup Grinding Disc $107.00
Add

ACTFLEX 101 UV Stable Trafficable Membrane $250.00

Waterproofing Systems Built for Australian Conditions

Engineered to perform in the most demanding environments.

Pool Waterproofing System

Designed for permanent water immersion. Chlorine, salt & UV stable.

ACTFLEX 989 CWP High-Performance Cementitious Membrane

ACTFLEX 989 CWP ACTFLEX 906 WPU Water-Based Polyurethane

ACTFLEX 906 ACTFLEX FLEXTAPE 120mm x 20m

ACTFLEX FLEXTAPE

1

Retaining Wall System

High performance negative pressure waterproofing for below ground structures.

ACTFLEX 989 CWP ACTFLEX SuperBond 007 PVC Universal Primer 1 Litre

ACTFLEX SUPERBOND ACTFLEX MESHTAPE 120mm x 20m

ACTFLEX MESHTAPE

1

Tank Waterproofing System

Potable water safe. Ideal for concrete water tanks and reservoirs.

ACTFLEX 989 ACTFLEX 906 WPU Water-Based Polyurethane

ACTFLEX 906 ACTFLEX FLEXTAPE 120mm x 20m

ACTFLEX FLEXTAPE

1

System Build-Up Guide

Correct application makes all the difference.

View All Details

Pool System Build-Up

1 Concrete Substrate
2 Crack Repair (if required)
3 ACTFLEX FLEXPLUS
4 ACTFLEX HYDROPLUG
5 ACTFLEX AT MESH
6 ACTFLEX 988 CWP (2 Coats)
7 Tile Adhesive
8 Pool Finish

Retaining Wall System Build-Up

1 Concrete Substrate
2 Crack Repair (if required)
3 ACTFLEX MS PRO
4 ACTFLEX AT MESH
5 ACTFLEX 988 CWP (2 Coats)
6 Protection Board (Optional)
7 Drainage System
8 Backfill

Tank System Build-Up

1 Concrete Substrate
2 Crack Repair (if required)
3 ACTFLEX FLEXPLUS
4 ACTFLEX AT MESH
5 ACTFLEX 988 WMP (2 Coats)
6 Protective Coating (Optional)
7 Water

Real Projects. Real Results.

View All Projects

Before After
Pool Renovation
Gold Coast, QLD
Before After
Below Ground Retaining Wall
Sydney, NSW
Before After
Concrete Water Tank
Perth, WA
Before After
Commercial Podium
Melbourne, VIC
Before After
Swimming Pool Construction
Brisbane, QLD

How to install

Watch the install

Step-by-step from prep to top coat. Filmed on the tools, not in a studio.

Why Choose

The Waterproofing Shop?

We supply premium waterproofing products backed by expert advice, fast service and real-world experience.

100% Australian
Owned & Operated

30+ Years in the
Waterproofing Industry

Thousands of Products
in Stock

Fast Shipping
Australia Wide

Expert Technical
Support

Frequently asked questions

View all FAQs

What is ACTFLEX Pigment Mica Powder used for?

Compatibility
ACTFLEX Pigment Mica Powder (20g) is a fine mica-based pigment added to clear epoxy floor coatings or topcoats to add sparkle, shimmer, and depth to decorative epoxy floor systems.
How much mica per epoxy?

Performance
Typical dose is 10-20g of mica per 5-10L of clear epoxy or topcoat. The 20g pack is sized for a small to medium decorative project. Stir thoroughly to evenly distribute the mica particles.
Can I combine mica with metallic paste?

Installation
Yes - many decorative epoxy floors combine ACTFLEX Metallic Epoxy Paste (for swirl patterns) with mica powder (for sparkle). Mix both pigments into the same wet epoxy batch before pouring.
Where can I add mica - basecoat or topcoat?

Compatibility
Mica can be added to the Crystal Coat epoxy basecoat (for in-floor sparkle) or to the Ultra Shield polyaspartic topcoat (for surface sparkle). Surface sparkle is more visible; in-floor sparkle is more subtle and has depth.
Will the sparkle dull over time?

Performance
Mica particles are encapsulated in the cured epoxy or polyaspartic and won't dull under normal wear. The Ultra Shield topcoat provides the UV protection and wear surface - the mica is permanently locked underneath.

ACTFLEX Pigment Mica Powder 20g

Key Features:

Perfect for: