
Duram Multithane ATC
UV-stable aliphatic polyurethane topcoat for Duram Multithane membranes and Duram 195. Greater colour fastness, longer membrane life.
Duram Multithane ATC is a single pack, moisture curing, liquid applied aliphatic polyurethane topcoat. It goes over the Multithane range and Duram 195 to protect them from UV. It forms a tough, flexible coating with no joints or laps.
Where to use it
- Topcoat over the Duram Multithane range and Duram 195
- New membranes, if applied within 24 hours
- Aged Multithane membranes, once cleaned and wiped with Duram Solvent
- Pedestrian traffic coating on its own
Why waterproofers buy it
- Aliphatic technology gives greater UV protection, colour fastness and anti-chalking
- Over 600% elongation, permanently flexible
- Passed 2000 hours QUV accelerated weathering
- Fast curing: touch dry in 4 to 6 hours, full cure within 24 hours
- Brush, roller, broom or squeegee
- Meets the Green Star environmental criteria
- 15 litre pail, grey
Coverage
Generally 3 m² per litre per coat. Apply to a dry film thickness of 300 microns.
Not for
Damp surfaces, as it will gas and bubble. Not for direct contact with chlorine above 10 ppm. It is usually not tiled or covered. Contains flammable solvents.
Pickup currently unavailable at The Waterproofing Shop

Duram Multithane ATC
The Waterproofing Shop
22/872 Canterbury Road
Roselands NSW 2196
Australia
How to Use
Technical Specifications

Technical Specifications
| Product Type | Cross linked, moisture curing, single pack, liquid applied aliphatic polyurethane waterproofing topcoat |
| Colour | Grey |
| Packaging | 15 Lt pail; 15 Litre equates to 17.5kg |
| Appearance (SDS) | Coloured or clear liquid; reacts with water |
| Relative Density (SDS) | 0.95 |
| Viscosity at 25C (ASTM D2196) | 4000 - 6000 Centipoise* |
| Specific Weight (ASTM D1475) | 1.3 - 1.4 Kg/Lt* |
| Weight Solids (theoretical) | 85%* |
| Minimum Total Coverage at 300 microns DFT | 2.5 - 3.0 m2/Lt* |
| Coverage per Coat | Generally 3m2 per litre per coat* |
| Tack Free Time at 25C and 55% R.H. | 6 - 12 hours* |
| Touch Dry | Within 4 - 6 hours |
| Re-coat | Between 6 - 24 hours |
| Full Cure | Within 24 hours |
| Nominal Dry Film Thickness | 300 microns |
| Flash Point, closed cup (ASTM D93) | Greater than 60C* |
| Flash Point (SDS) | 41C |
| Service Temperature | -40 to 80C* |
| Max Shock Temperature | 200C* |
| Hardness (ASTM D2240) | 80 Shore A* |
| Tensile Strength at Break (ASTM D412) | 90 Kg/cm2* |
| Percent Elongation at 23C (ASTM D412) | Greater than 600%* |
| Percent Elongation at -25C (ASTM D412) | 200%* |
| Water Vapour Transmission (ASTM E96) | 0.8 g/m2/hr* |
| Adhesion to Concrete (ASTM D4541) | Greater than 20 Kg/cm2* |
| Thermal Resistance 100 Days at 80C (EOTA TR011) | Passed* |
| QUV Accelerated Weathering (ASTM G53) | Passed 2000 hours* |
| VOC (APAS AP-D181) | Less than 250 g/L* |
| Environmental | Meets the Green Star environmental criteria |
| Shelf Life | 6 months in unopened container |
| Hazard Classification (SDS) | Hazardous Chemical, Dangerous Goods, Poisons Schedule S6 |
| GHS Classification (SDS) | Flammable Liquids Category 3, Skin Corrosion/Irritation Category 2, Sensitisation (Skin) Category 1, Serious Eye Damage/Eye Irritation Category 2A |
| Dangerous Goods (SDS) | UN 1866, RESIN SOLUTION, flammable, Class 3, Packing Group III |
| * Typical physical performance figures published by Duram against the stated test methods; no accredited test report is cited | |
The Waterproofing Shop?
We supply premium waterproofing products backed by expert advice, fast service and real-world experience.
Owned & Operated
Waterproofing Industry
in Stock
Australia Wide
Support
