Dry-Treat Waterborne Impregnating Sealer
STAIN-PROOF® Premium Waterborne Impregnating Sealer, formerly known as STAIN-PROOF WATERBORNE™, is a premium water-based sealing technology designed to seal a range of stone and masonry surfaces, including granite, travertine, limestone and marble. Premium Waterborne Impregnating Sealer protects against staining from oils and other contaminants and provides long-lasting water repellency. Treated surfaces retain breathability, existing color and finish - surfaces are also easier to clean. For indoor, outdoor, residential and commercial use.
Chemically bonds to the substrate for permanent oil and water repellency
Short dwell time, all excess removed after 5 minutes
10 year performance warranty when applied by an Accredited Applicator
7-Day Money BackGuarantee
Fast DispatchNext Business Day
Expert Advice(02) 8021 3517
Secure CheckoutSSL EncryptedPickup available at The Waterproofing Shop
Usually ready in 24 hours
Dry-Treat Waterborne Impregnating Sealer
3.79L
The Waterproofing Shop
22/872 Canterbury Road
Roselands NSW 2196
Australia
Product Details
How to Use
Technical Specifications
Product Files
Frequently bought together
Technical overview
Key applications
- Building facades
- Floors
- Walls
- Showers
- Swimming pool surrounds
- Patios
- Garages
- Kitchens
- Entertaining areas
- Indoor and outdoor residential and commercial buildings
Surface suitability
- Granite (floors and walls)
- Travertine (floors and walls)
- Limestone (floors and walls)
- Marble (floors and walls)
- Stone and masonry surfaces generally (test on a small, inconspicuous area first)
Test the product on a small, inconspicuous area first and allow a 24 hour cure time before judging the result. Do not thin the product. Remove ALL excess sealer with clean, dry, white cloths or towels no longer than 5 minutes after application; failure to remove excess results in a white haze that is difficult to remove, and the sealer must not be allowed to dry on the surface. Apply only when the surface temperature is between 5-35C. Avoid moisture contact with the surface for 24 hours after application. The sealer will NOT prevent surface etching, scuff marks or wear, and spills should be cleaned up immediately to minimise absorption. WARNING: causes serious eye irritation, may cause an allergic skin reaction, harmful to aquatic life. Avoid breathing mist, vapours or spray, wear protective gloves, protective clothing and eye or face protection, and avoid release to the environment.
Calculate your coverage
You will need:
Dry-Treat Waterborne Impregnating Sealer
3.8L 3.79l
Total coverage: 0 m²
This is an estimate only. Add 10% for wastage.
Technical Specifications
| Product Type | Premium water-based sealing nano-technology, impregnating sealer |
| Contents | Silicone, fluoroacrylate, water |
| Previously Known As | STAIN-PROOF Waterborne |
| Bonding | Chemically bonds to the substrate for permanent oil and water repellency |
| Performance | Superior penetration, breathability and alkali resistance |
| Coverage | 1 litre per 2 to 15 m2 depending on surface absorption |
| Number of Coats | One coat; wait 30 minutes before a second coat if one is applied |
| Dwell Time | Remove ALL excess after 5 minutes, or as the sealer soaks into the substrate |
| Excess Removal Limit | No longer than 5 minutes after application; do not allow the sealer to dry on the surface |
| Cure for Testing | 24 hours |
| Moisture Contact | Avoid for 24 hours after application |
| Application Temperature | 5-35C surface temperature |
| Thinning | Do not thin the product |
| Warranty | 10 year performance warranty when applied by an Accredited Applicator |
| VOC Content | Less than 100 g/L (calculated) |
| Equipment Cleaning | Water |
| Pack Sizes | 32 fl oz (0.95L) and 1 gallon (3.79L) |
| Storage | Keep container closed |
| Country of Manufacture | Made in USA with globally sourced materials |
| Hazard Classification | WARNING - causes serious eye irritation, may cause an allergic skin reaction, harmful to aquatic life |
| Source Document | Product Specification Sheet Rev. 6.22 |
Frequently asked questions
-
What's the advantage over solvent-based Premium?
CompatibilityPremium Waterborne is the low-VOC water-based alternative to Premium Impregnating Sealer - same Stain-Proof technology, suitable for sensitive sites (occupied buildings, indoor applications, areas with strict VOC limits).
-
Coverage rate?
PerformanceCoverage is 2-15 m² per litre depending on substrate absorption. Suitable for granite, travertine, limestone, marble and broader stone + masonry.
-
How is it applied?
InstallationUse a lamb's wool or microfibre applicator, foam roller, or HLVP hand-pump sprayer. Apply 2 coats with 30 minutes between coats. Remove excess within 5 minutes of application.
-
Indoor/outdoor use?
CompatibilityYes - suitable for indoor and outdoor, residential and commercial use. Treated surfaces retain breathability, existing colour, and natural finish.
-
Warranty?
Compliance10-year performance warranty when applied by a Dry-Treat Accredited Applicator. Allow 24-hour cure and moisture avoidance after application.
Why trade professionals choose Stain Proof
Stain Proof, also sold under the Dry Treat name, is a stone and masonry protection range built around impregnating sealers that soak into the surface instead of forming a film over it. The line covers solvent carried and waterborne sealers for natural stone, porcelain, quartz, pavers, concrete and grout, plus colour enhancing options and the acid, alkaline and daily cleaners used to prepare and maintain sealed surfaces. Supplied to the Australian trade through The Waterproofing Shop, including seal, clean and maintain packs that cover a whole job in one order.
Shop all Stain ProofMore from The Waterproofing Shop
Read up on the systems, or come and learn them hands on with our trainers.
