Pool System Build-Up
- 1 Concrete Substrate
- 2 Crack Repair (if required)
- 3 ACTFLEX FLEXPLUS
- 4 ACTFLEX HYDROPLUG
- 5 ACTFLEX AT MESH
- 6 ACTFLEX 988 CWP (2 Coats)
- 7 Tile Adhesive
- 8 Pool Finish
Forspec Epoxy Mixing Paddle Mixer
or 4 interest-free payments with
Polypropylene epoxy mixing paddle. Fits a 1/4 inch drill or impact driver, and cured epoxy peels straight off.
The Forspec Epoxy Mixing Paddle is a 28 cm polypropylene paddle for mixing epoxy with a drill. When the job is done, let the leftover epoxy cure and peel it off the paddle.
What it's for
- Mixing epoxy
- Runs in electric drills and impact drivers with a 1/4 inch shaft
Why waterproofers buy it
- Polypropylene body. Cured epoxy peels off instead of needing solvent
- 28 cm long for handling and mixing control
- 1/4 inch shaft fits drills and impact drivers
Specs
Material: polypropylene. Length: 28 cm. Shaft: 1/4 inch. No data sheet is published for this paddle, so follow the resin TDS for mixing speed and time.
Fits electric drills and impact drivers with a 1/4 inch shaft
Polypropylene body - let the epoxy cure, then peel it off
28cm long for handling and mixing control
7-Day Money BackGuarantee
Fast DispatchNext Business Day
Expert Advice(02) 8021 3517
Secure CheckoutSSL Encrypted
Get it
—
—
Pickup available at The Waterproofing Shop
Usually ready in 24 hours
Forspec Epoxy Mixing Paddle Mixer
The Waterproofing Shop
22/872 Canterbury Road
Roselands NSW 2196
Australia
Technical Specifications
Product Files
No documentation available for this product.
Forspec Epoxy Mixing Paddle Mixer
Sale price$10.00
Frequently bought together
-
-
-
Soudal T-Rex Crystal $17.85 -
System Build-Up Guide
Correct application makes all the difference.
Retaining Wall System Build-Up
- 1 Concrete Substrate
- 2 Crack Repair (if required)
- 3 ACTFLEX MS PRO
- 4 ACTFLEX AT MESH
- 5 ACTFLEX 988 CWP (2 Coats)
- 6 Protection Board (Optional)
- 7 Drainage System
- 8 Backfill
Tank System Build-Up
- 1 Concrete Substrate
- 2 Crack Repair (if required)
- 3 ACTFLEX FLEXPLUS
- 4 ACTFLEX AT MESH
- 5 ACTFLEX 988 WMP (2 Coats)
- 6 Protective Coating (Optional)
- 7 Water
Key applications
- Mixing epoxy
Surface suitability
- Epoxy (the polypropylene lets cured epoxy be peeled off after use)
No data sheet is published for this paddle, so there is no rated drill speed, no maximum drill wattage, no chemical compatibility list and no PPE guidance. Clean it by letting the epoxy cure and peeling it off the polypropylene, and always follow the resin manufacturer's current Technical Data Sheet for mixing speed and mixing time.
Technical Specifications
| Tool Type | Mixing paddle for epoxy |
| Material | Polypropylene |
| Length | 28cm |
| Shaft | 1/4 inch |
| Machine Fit | Electric drills and impact drivers |
| Cleaning | Allow the epoxy to cure, then peel it off the polypropylene |
Real Projects. Real Results.
-
Before
After
Pool Renovation
Gold Coast, QLD
-
Before
After
Below Ground Retaining Wall
Sydney, NSW
-
Before
After
Concrete Water Tank
Perth, WA
-
Before
After
Commercial Podium
Melbourne, VIC
-
Before After
Swimming Pool Construction
Brisbane, QLD
Watch the install
Step-by-step from prep to top coat. Filmed on the tools, not in a studio.
The Waterproofing Shop?
We supply premium waterproofing products backed by expert advice, fast service and real-world experience.
100% AustralianOwned & Operated
30+ Years in theWaterproofing Industry
Thousands of Productsin Stock
Fast ShippingAustralia Wide
Expert TechnicalSupport
Frequently asked questions
-
What is the epoxy mixing paddle designed for?
CompatibilityThe Forspec Epoxy Mixing Paddle is specifically designed for blending two-component epoxy systems like Crystal Coat, ProBond 1100PS, and Ultra Shield, providing low-shear mixing that avoids air entrainment.
-
Why a dedicated epoxy paddle?
PerformanceStandard paint mixers create too much air during epoxy mixing, causing pinholes and bubbles in the finished floor. The slow-pitch helical design folds Part A and Part B together without whipping in air.
-
What drill should I use?
InstallationUse a low-RPM (300-500 rpm) high-torque drill. High-speed cordless drills are NOT recommended - the high RPM creates air entrainment that ruins epoxy clarity and pinhole-free finish.
-
Can I use this for other products?
CompatibilityYes - the paddle also works well for high-viscosity polyurethane sealants and grouts where smooth blending matters. Avoid using for cementitious products where vigorous agitation is needed.
-
How do I clean it after epoxy?
PerformanceWipe excess material off with a rag, then clean residues with epoxy solvent (xylene or MEK) before the epoxy cures. Cured epoxy is virtually impossible to remove without grinding.