Will it remove cured epoxy grout?

Most effective on epoxy grout residue removed within 48 hours of grouting. Heavily cured residue may require mechanical assistance or specialist removers.

How do I use Litonet Gel Evo?

Apply neat with a brush or pad to dry residue. Allow 20-30 minutes contact time (do not let dry fully). Agitate with stiff brush and rinse with clean water.

Which surfaces is it safe on?

Most glazed ceramic, porcelain, glass mosaic and tough natural stone. Always spot-test on porous stones, marble, or polished surfaces before full use.

Can I buy a replacement disc separately?

Yes, replacement discs with the integrated hole saw are available separately through our store. You won't need to re-purchase the dust shroud each time, just the disc. Contact us at (02) 8021 3517 or check the product page for current availability.

SOPREMA Alsan Flashing Quadro PUR 5kg liquid waterproofing membrane for flashing and detailing applications

Be the first to review

Soprema Alsan Flashing Quadro 5kg Liquid Detailer

Name: Soprema Alsan Flashing Quadro 5kg Liquid Detailer
Brand: Soprema
SKU: SSOT365
Price: 200.00 AUD
Availability: InStock

$200.00

or 4 interest-free payments with

One-pack polyurethane detailing resin. No catalyst, no activator, no primer on most surfaces.

Soprema ALSAN FLASHING QUADRO is a single-component polyurethane resin for waterproofing junctions between horizontal surfaces, up-stands and various roof details. It is flameless, so it suits heat sensitive substrates. It comes in a 5 kg pail.

Where to use it

General roofing
Plaza decks and terraces
Retaining walls
Planter boxes
Junctions between horizontal surfaces and up-stands

Why waterproofers buy it

Doesn't need a catalyst or activator. Simple and quick to prepare
Thixotropic, so it is easy to install
No primer on concrete, wood, bitumen, PVC and many metals
Root and rhizome resistant according to the FLL test method
UV, chemical and weather resistant. Life expectancy of 25 years
Rainproof in approx. 4 hours, walkable in approx. 6 hours at 23 °C
Solids content 85%

Coverage

3 kg/m². Lay the first layer at approx. 2 kg/m², embed ALSAN FLEECE 165 P, then cover with approx. 1 kg/m². Fleece overlaps at least 5 cm.

Not for

Substrate or air temperature outside 5 °C to 35 °C, atmospheric moisture over 80%, or mineral substrates over 5% moisture. Recoat within 72 hours, after that prepare with ALSAN System Cleaning Agent. Primer is needed on HDPE surface membranes, untreated copper, stainless steel, TPO and EPDM.

All times at 23 °C.

Root and rhizome resistant according to the FLL test method

One component, no catalyst, activator or mixing required

No primer needed on concrete, wood, bitumen, PVC and many metals

Quantity: 1

7-Day Money BackGuarantee

Fast DispatchNext Business Day

Expert Advice(02) 8021 3517

Secure CheckoutSSL Encrypted

Get it — —

Pickup available at The Waterproofing Shop

Usually ready in 24 hours

Soprema Alsan Flashing Quadro 5kg Liquid Detailer

The Waterproofing Shop

Pickup available, usually ready in 24 hours

22/872 Canterbury Road
Roselands NSW 2196
Australia

+61280213517

Product Details

Premium single-component polyurethane liquid waterproofing resin designed for roof flashings, upstands, penetrations and complex waterproofing details requiring a seamless, durable finish.

How to Use

Apply the first layer by brush or roller at approx. 2 kg/m2, embed ALSAN FLEECE 165 P, then apply a second layer at approx. 1.0 kg/m2Abrade the metal and mineral junction areas
Remove loose slate chippings on bitumen sheets with a wire brush
Clean the junction areas, remove the dust from the surface and let the cleaning agent flash off before waterproofing work starts
Mark the borders with PE-coated masking tape, also used to decouple joints and delicate material transitions
Sand PVC pipe with sandpaper and clean all metal surfaces with a non-greasy solvent such as acetone or MEK
Prime only where required - ALSAN 104 for HDPE surfaced membranes, untreated copper and stainless steel, ALSAN 103 for TPO and EPDM
Mix the product well before use
Apply the first layer by brush or roller at approx. 2 kg/m2, generously at material transitions, in corners and on vertical surfaces
Lay ALSAN FLEECE 165 P, already cut to size, into the fresh embedding layer and work it in immediately with a roller to remove any bubbles
Lap the fleece at least 5 cm and apply resin in between the overlaps
Embed additional layers of fleece on internal and external corners with sufficient material again applied
Check for white patches when the fleece is folded back - they mean too little material was applied
Without any interval, cover the fleece with a second layer at approx. 1.0 kg/m2
Where a different finish is required, apply an additional topping layer at approx. 1 kg/m2 and broadcast the surface protection into the fresh layer
Allow approx. 4 hours at 23C for rainproof and approx. 6 hours for walkable

Technical Specifications

Product Type: Single-component polyurethane resin
Consistency: Thixotropic
Reinforcement: ALSAN FLEECE 165 P
Colour: RAL 7012; on demand RAL 7022, RAL 7040 or RAL 9005
Packaging: 5 kg and 10 kg
Pails per Pallet: 82 or 42
Density at 23C: 1.19 g/cm3
Viscosity at 23C: 7500 mPa.s
Solids Content: 85 %
Shore A Hardness: 42
Water Vapour Permeability u: 8022
Sd at 3.0 kg/m2: 19.3 m
Sd at 2.0 kg/m2: 12.8 m
Consumption: 3 kg/m2 total
First Layer: Approx. 2 kg/m2, approx 2/3 of the product
Second Layer: Approx. 1.0 kg/m2, approx 1/3 of the product
Rainproof: Approx. 4 hours at 23C
Walkable: Approx. 6 hours at 23C
Maximum Overlay Time at 23C: 72 hours, after which the surface must be prepared with ALSAN System Cleaning Agent
Application Temperature: 5C min to 35C max, substrate or ambient
Maximum Atmospheric Moisture: 80 %
Maximum Moisture of Mineral Substrates: 5 % w/w
Moisture of Wood: 16 % v/v
Dew Point: Substrate temperature must be at least 3C above the dew point during application and curing
Fleece Overlap: Minimum 50 mm
Fleece Overlap on Detail Work: At least 5 cm wide
Root Resistance: Root and rhizome resistant according to the FLL test method
Standard Cited: Highest solicitation category according to ETAG 005
Life Expectancy: 25 years
Concrete Requirement: Fully cured 28 days, minimum hardness 24 MPa, surface profile ICRI CSP 3 or 4
Shelf Life: At least 12 months unopened, kept cool, dry and protected from frost

Product Files

Technical Data Sheet (TDS) PDF Download

Soprema Alsan Flashing Quadro 5kg Liquid Detailer

$200.00

Frequently bought together

This item

Soprema Alsan Flashing Quadro 5kg Liquid Detailer $200.00

Technical overview

ALSAN FLASHING QUADRO is a single-component polyurethane resin for waterproofing junctions between horizontal surfaces, up-stands and various roof details. It is applied cold by brush or roller in two layers with ALSAN FLEECE 165 P embedded between them, at a total consumption of 3 kg/m2, and needs no catalyst or activator. Its thixotropic consistency holds on vertical work and it can be applied without a primer to concrete, wood, bitumen, PVC and many metals. The technical data sheet states compliance with the highest solicitation category according to ETAG 005 and root and rhizome resistance according to the FLL test method. It claims no AS/NZS 4858 or AS 4654.1 classification, and no accredited Australian test report is cited.

Key applications

Waterproofing junctions between horizontal surfaces, up-stands and various roof details
General roofing
Plaza decks and terraces
Retaining walls
Planter boxes
Flameless waterproofing of junctions on heat sensitive substrates

Surface suitability

Concrete (fully cured 28 days, minimum 24 MPa, surface profile ICRI CSP 3 or 4, moisture max 5% by mass)
Wood (moisture max 16% by volume, no primer)
Metal and prepainted metal (cleaned with acetone or MEK, smooth, clean and free of oxidised bitumen)
PVC pipe (sanded with sandpaper, no primer)
Traditional granulated and sanded bituminous waterproofing membranes (no primer)
Polyurethane membrane TRAFIK HP (no primer)
Membranes with HDPE surface, untreated copper and stainless steel (primed with ALSAN 104)
TPO and EPDM (primed with ALSAN 103)

Concrete must be fully cured (28 days) with a minimum hardness of 24 MPa and prepared to a concrete surface profile (ICRI CSP) of 3 or 4; substrate moisture must not exceed 5% by mass or 16% by volume. Apply only between 5C and 35C substrate or ambient, with atmospheric moisture 80% maximum, and keep the substrate temperature at least 3C above the dew point during application and curing. Maximum overlay time at 23C is 72 hours, after which the surface must be prepared with ALSAN System Cleaning Agent. Membranes with an HDPE surface, untreated copper and stainless steel require ALSAN 104 primer; TPO and EPDM require ALSAN 103. PVC pipe must be sanded and all metal surfaces cleaned with a non-greasy solvent such as acetone or MEK, free of oxidised bitumen. Once opened, the product only has a limited shelf life.

Technical Specifications

Product Type	Single-component polyurethane resin
Consistency	Thixotropic
Reinforcement	ALSAN FLEECE 165 P
Colour	RAL 7012; on demand RAL 7022, RAL 7040 or RAL 9005
Packaging	5 kg and 10 kg
Pails per Pallet	82 or 42
Density at 23C	1.19 g/cm3
Viscosity at 23C	7500 mPa.s
Solids Content	85 %
Shore A Hardness	42
Water Vapour Permeability u	8022
Sd at 3.0 kg/m2	19.3 m
Sd at 2.0 kg/m2	12.8 m
Consumption	3 kg/m2 total
First Layer	Approx. 2 kg/m2, approx 2/3 of the product
Second Layer	Approx. 1.0 kg/m2, approx 1/3 of the product
Rainproof	Approx. 4 hours at 23C
Walkable	Approx. 6 hours at 23C
Maximum Overlay Time at 23C	72 hours, after which the surface must be prepared with ALSAN System Cleaning Agent
Application Temperature	5C min to 35C max, substrate or ambient
Maximum Atmospheric Moisture	80 %
Maximum Moisture of Mineral Substrates	5 % w/w
Moisture of Wood	16 % v/v
Dew Point	Substrate temperature must be at least 3C above the dew point during application and curing
Fleece Overlap	Minimum 50 mm
Fleece Overlap on Detail Work	At least 5 cm wide
Root Resistance	Root and rhizome resistant according to the FLL test method
Standard Cited	Highest solicitation category according to ETAG 005
Life Expectancy	25 years
Concrete Requirement	Fully cured 28 days, minimum hardness 24 MPa, surface profile ICRI CSP 3 or 4
Shelf Life	At least 12 months unopened, kept cool, dry and protected from frost

Frequently asked questions

View all FAQs

Will it remove cured epoxy grout?

Performance
Most effective on epoxy grout residue removed within 48 hours of grouting. Heavily cured residue may require mechanical assistance or specialist removers.
How do I use Litonet Gel Evo?

Application
Apply neat with a brush or pad to dry residue. Allow 20-30 minutes contact time (do not let dry fully). Agitate with stiff brush and rinse with clean water.
Which surfaces is it safe on?

Compatibility
Most glazed ceramic, porcelain, glass mosaic and tough natural stone. Always spot-test on porous stones, marble, or polished surfaces before full use.
Can I buy a replacement disc separately?

Durability & Value
Yes, replacement discs with the integrated hole saw are available separately through our store. You won't need to re-purchase the dust shroud each time, just the disc. Contact us at (02) 8021 3517 or check the product page for current availability.

Why trade professionals choose Soprema

Soprema is a French waterproofing manufacturer whose torch applied and liquid applied systems are supplied to the Australian trade. The range stocked here covers Soprasun Plus sheet membranes for roof and balcony work, Colphene 3000 for below ground and retaining wall work, Alsan Flashing liquid detailers for junctions and penetrations, and the Elastocol Stick and AntiRock primers that go underneath them. It is a system led range, so most jobs pull a primer, a membrane and a detailing product from the same brand.

Shop all Soprema