
Soudal T-Rex Power | Fast Grab 290mL
1-second grab hybrid polymer adhesive sealant that sticks to damp surfaces. Good adhesion to most substrates.
Soudal T-Rex Power Fast Grab is a high strength adhesive sealant based on Soudal SMX Hybrid Polymer. It grabs straight away, so you need less initial support. Sold here in Bright White and Steel Grey, 290 mL cartridge. Gun it on, smooth it off and move on.
Where to use it
- Sealing and bonding in building and construction
- Elastic bonding of panels, profiles and other pieces on wood, MDF, chipboard and other common substrates
- Sealing of floor joints
- Brick, concrete, metals, treated timber, PVC and plastics, rigid, clean, free of dust and grease, dry or slightly moist
Why waterproofers buy it
- 1-second immediate grab and fast curing, about 3 mm in 24 hours
- Even adheres to damp surfaces
- Stays elastic after curing, 300% elongation at break
- No odour. No isocyanates or silicones
- Good weather and UV resistance. Can be painted with water-based systems
- Skin forms in about 5 minutes, so tool the joint before it skins
- WaterMark WMTS-014:2016, Licence WM-023300
- Application temperature 5 to 35°C. Cured temperature resistance -40 to 90°C
Joint size
Sealing joints: 5 to 30 mm wide, 5 to 15 mm deep, half the width equals the depth. Bonding: 2 to 10 mm wide. Bond thickness of at least 2 mm.
Not for
PE, PP, PTFE, bituminous substrates, copper, bronze or brass. Not a glazing sealant. Not for aquariums or continuous water immersion. Natural stone: bonding only, not as a joint sealant. Do a preliminary adhesion test on every surface. Porous surfaces need Soudal Primer 150.
Values at 23°C and 50% RH.
Pickup available at The Waterproofing Shop
Usually ready in 24 hours

Soudal T-Rex Power | Fast Grab 290mL
Bright White
The Waterproofing Shop
22/872 Canterbury Road
Roselands NSW 2196
Australia
Product Details
How to Use
Technical Specifications

Frequently bought together
-
-
-
Sika 5L Measuring Jug $25.00
Technical overview
Key applications
- Sealing and bonding in the building and construction industry
- Elastic bonding of panels, profiles and other pieces on the most common substrates (wood, MDF, chipboard)
- Elastic structural bonding in car and container industry
- Sealing of floor joints
- Bonding to the bottom of natural stone tiles
Surface suitability
- Brick and concrete (rigid, clean, free of dust and grease, dry or slightly moist)
- Metals tested by Soudal (AlCuMg1, AlMg3, AlMgSi1, stainless steel, electro-galvanized steel, steel ST1403, hot dip galvanized steel)
- Plastics tested by Soudal (polystyrene, polycarbonate, PVC, polyamide, fiberglass reinforced epoxy, polyester)
- Treated timber, wood, MDF and chipboard
- Non-porous surfaces (prepared with a Soudal Surface Activator or cleaner)
- Porous surfaces (primed with Soudal Primer 150)
- Natural stone (bonding to the bottom of tiles only, not as a joint sealant on this surface)
T-Rex Power Fast Grab cannot be used as a glazing sealant. It can be used for bonding of natural stone but cannot be used as a joint sealant on that surface, so only on the bottom of natural stone tiles. Not suitable for bonding aquariums. Do not use in applications where continuous water immersion is possible. Not suitable for PE, PP, PTFE, bituminous substrates, copper or copper-containing materials such as bronze and brass. Bonding plastics like PMMA or polycarbonate in stress loaded applications can give rise to stress cracking and crazing and is not recommended. Application temperature is 5C to 35C. The optimal bond thickness is at least 2 mm for the elastic properties to come to full justice. A total absence of UV can cause a colour change, and discolouration due to chemicals, high temperatures or UV radiation may occur without affecting the technical properties. Avoid contact with bitumen, tar or other plasticizer releasing materials such as EPDM, neoprene and butyl, which can give rise to discolouration and loss of adhesion. Run a preliminary adhesion test on every surface.
Calculate your coverage
You will need:
Soudal T-Rex Power | Fast Grab 290mL
0.3L sausage
Total coverage: 0 m²
This is an estimate only. Add 10% for wastage.
Technical Specifications
| Product Type | One-component moisture-curing hybrid polymer adhesive sealant |
| Chemical Base | SMX Hybrid Polymer |
| Consistency | Stable paste |
| Curing System | Moisture curing |
| Colour | Bright white, jet black, steel grey, beach sand, quick silver |
| Initial Grab | 1 second immediate grab* |
| End Strength | 320 tonnes per m2* |
| Skin Formation | Ca. 5 min @ 23C, 50% RH* |
| Curing Speed | Ca. 3 mm/24h @ 23C, 50% RH* |
| Hardness | Ca. 65 +/- 5 Shore A* |
| Density | Ca. 1.47 g/mL* |
| Elastic Recovery | Greater than 80% (ISO 7389)* |
| Maximum Allowed Distortion | +/- 20% (ISO 11600)* |
| Max. Tension | Ca. 3.20 N/mm2 (MPa) (ISO 37)* |
| Elasticity Modulus 100% | Ca. 2.10 N/mm2 (MPa) (ISO 37)* |
| Elongation at Break | 300% (ISO 37)* |
| Temperature Resistance | -40C to 90C* |
| Application Temperature | 5C to 35C |
| Joint Dimensions | 5mm to 30mm wide, 5mm to 15mm deep; recommendation for sealing is half width equals depth |
| Bonding Width | 2mm to 10mm |
| Optimal Bond Thickness | At least 2 mm for the elastic properties to come to full justice |
| Total VOC | Less than 1% (SDS) |
| Packaging | 290 mL cartridge, 600 mL sausage |
| Shelf Life | 15 months in original unopened packaging between 5C and 25C |
| WaterMark | WMTS-014:2016 Licence WM-023300 |
| LEED | Complies with USGBC LEED 2009 Credit 4.1 Low-Emitting Materials, SCAQMD rule 1168 |
| Hazard Classification | Not classified as hazardous under Safe Work Australia GHS 7, not classified as Dangerous Goods (SDS) |
| * Soudal published values quoted against ISO test methods; no accredited third-party test report is cited in the TDS | |
Frequently asked questions
-
What's the bead thickness needed?
ApplicationMinimum 2 mm bond thickness for full elastic properties. Apply with high thrust-ratio caulking gun and tool with soapy solution before skin forms.
-
Which substrates suit it?
CompatibilityAll common building substrates — brick, concrete, metals, treated timber, PVC and most plastics. Slightly moist substrates are acceptable.
-
Coverage per cartridge?
Coverage & Coats290 mL covers ~6-9 m linear at 6mm bead; 600 mL sausage delivers ~12-18 m linear.
-
How fast can I load the bond?
Cure & Dry TimeSkin formation ≈ 5 min. Cure speed ≈ 3 mm/24h. Full strength achieved in 24 hours.
-
Shelf life and storage?
Storage15 months sealed at 5-25°C in a cool dry place.
-
Is it certified for potable water?
PerformanceYes — holds WaterMark Certificate WM-023300_001 for water contact applications.
Why trade professionals choose Soudal
Soudal is a widely used sealant and adhesive brand supplied to the Australian trade, and the range stocked here is focused on cartridge products for wet area and general construction work. You will find Soudal Silicone All Purpose alongside the T-Rex family of hybrid adhesive sealants, including T-Rex Crystal, T-REX XTREME, T Rex Flexi and T-Rex Power Fast Grab. Reach for the silicone on standard perimeter and sanitary joints, and a T-Rex hybrid when the job calls for grab and bonding strength.
Shop all SoudalMore from The Waterproofing Shop
Read up on the systems, or come and learn them hands on with our trainers.







