UNI-PRO 160mm Roller Covers 10 Pack
The UNI PRO 160mm Microfibre Roller Covers 10 Pack is a trade-quality solution designed for smooth and efficient paint application. Made with high-quality microfibre, these roller covers deliver an even, low-sheen finish with minimal splatter.
Perfect for both professional painters and DIY users, these covers are ideal for use on walls, ceilings, and other smooth surfaces.
10 x 160mm micro-fibre covers with a short/medium 10mm nap
High absorption, low spatter and lint free
Fits 160mm slide-on roller frames
7-Day Money BackGuarantee
Fast DispatchNext Business Day
Expert Advice(02) 8021 3517
Secure CheckoutSSL EncryptedPickup available at The Waterproofing Shop
Usually ready in 24 hours
UNI-PRO 160mm Roller Covers 10 Pack
The Waterproofing Shop
22/872 Canterbury Road
Roselands NSW 2196
Australia
Technical Specifications
What's Included?
Product Files
No documentation available for this product.
Frequently bought together
Key applications
- Painting walls and ceilings
- Undercoat
- Plasterboard
- Cement sheet
- Fascia boards
- Small spaces such as cupboards
- Decking boards and posts
- Getting in and around areas requiring a detailed finish
Surface suitability
- Walls and ceilings (flat and low sheen paints)
- Plasterboard
- Cement sheet
- Fascia boards
- Decking boards and posts
UNi-PRO prints this warning on the pack: may not be suitable for use with 2 pack epoxy and some industrial coatings, test for suitability prior to use. The covers are rated for flat and low sheen paints and a smooth low sheen finish, so they are not the fabric for a high build or textured coating. They fit 160mm slide-on roller frames only. Before painting, run a hand along the sleeve several times to remove excess fibres, or rinse in water and allow to dry. After use, clean the sleeve immediately in the recommended solvent or water, then wash in warm soapy water, rinse and dry standing upright. UNi-PRO publishes no PPE requirement or other operating limit for these covers, and no technical data sheet exists.
Calculate your coverage
You will need:
UNI-PRO 160mm Roller Covers 10 Pack
1kg Kit
Total coverage: 0 m²
This is an estimate only. Add 10% for wastage.
Technical Specifications
| Product Type | Micro-fibre mini roller covers |
| Range | UNi-PRO Trade |
| Manufacturer Product Code | HD73025 |
| Barcode | 9314885005229 |
| Cover Size | 160mm |
| Nap | 10mm, short/medium |
| Pack Size | 10 covers per pack |
| Frame Fit | 160mm slide-on roller frames |
| Paint Suitability | Flat and low sheen paints |
| Finish Produced | Smooth low sheen |
| Fabric Performance | High absorption, low spatter and lint free |
| Country of Manufacture | Made in China for Uni-Pro Painting Equipment |
| Carton Quantity | 6 |
| No technical data sheet is published for this product. The figures above are the manufacturer's published product page and retail pack specification. | |
What's Included
Frequently asked questions
-
What are these covers used for?
CompatibilityThe 10-pack of 160mm Microfibre Roller Covers is the bulk trade pack for general wall, ceiling, and smooth surface painting with water-based flats and low-sheen paints.
-
Why 10-pack?
PerformanceBulk 10-pack reduces per-cover cost for trade users and provides covers for multi-coat, multi-room projects. Microfibre is most economical bought in bulk - covers are essentially single-use for premium finishes.
-
Which frames fit?
InstallationFits 160mm slide-on frames including the Long Reach Uni Pro Roller Frame and other 160mm UNi-PRO frames. Slide on the cover, paint, then dispose or wash between coats.
-
Suits which paint types?
CompatibilityBest with water-based flat and low-sheen paints on walls, ceilings, and smooth surfaces. Delivers even finish with minimal spatter and lint-free performance.
-
How long does each cover last?
PerformanceA fresh cover applies approximately 20-40 m² of paint before becoming saturated. For best finish quality, swap covers between coats and between product changes (e.g., primer to topcoat).
Why trade professionals choose Uni-Pro
Uni-Pro supplies application tools and site consumables to the Australian trade: roller covers and frames, adjustable yoke frames, trays and tray liners, filling blades, paint can and drum openers, wire brush and scraper sets, trade rags, sugar soap and marine anti-fouling kits. On a waterproofing job the applicator matters as much as the coating, because the nap and the frame decide how evenly a membrane lays down and how well it works into corners, junctions and penetrations. We stock the Uni-Pro range so applicators and consumables can be ordered on the same job as the membranes, primers, sealants and adhesives they are used with.
Shop all Uni-ProMore from The Waterproofing Shop
Read up on the systems, or come and learn them hands on with our trainers.
