3-in-1 Taper Gauge Inspection Tool

Sale price$85.00
Sold out
or 4 interest-free payments with

Ruler, hole gauge and clearance gauge in one 1.2mm stainless blade, made in Australia.

The Site Inspections T800 3 in 1 Taper Gauge is a pocket-sized measuring tool for building inspectors and construction pros. It is a ruler, a hole diameter gauge and a clearance gauge on one dual blade.

What it's for

  • Length, as a standard ruler
  • Hole diameter. Push it into the hole and read the diameter at the point of complete contact
  • Clearance. Push the edge into the gap and read the scale at a right angle

Why waterproofers buy it

  • Three measuring jobs, one tool in your pocket
  • Hardened 420 stainless steel
  • Black surface coat that is practical for clear report photography
  • Dual blade for quick switches between measurements
  • Crafted in Australia

Specs

Ruler 0 to 120mm, 0.5mm graduation. Hole diameter gauge 2 to 15mm. Clearance range 1 to 15mm. Overall 144mm long, 16mm wide, 1.2mm thick.

Not for

Holes over 15mm or clearances over 15mm. The black coat can scratch and show the steel underneath. Clean with isopropyl alcohol or turps.

Three gauges in one tool - ruler, hole diameter and clearance
Hardened 420 stainless steel, 1.2mm thick, made in Australia
Black surface coat reads clearly in report photography

7-Day Money Back 7-Day Money BackGuarantee
Fast Dispatch Fast DispatchNext Business Day
Expert Advice Expert Advice(02) 8021 3517
Secure Checkout Secure CheckoutSSL Encrypted
Get it — —

Pickup currently unavailable at The Waterproofing Shop

3-in-1 Taper Gauge Inspection Tool

3-in-1 Taper Gauge Inspection Tool

The Waterproofing Shop

Pickup currently unavailable

22/872 Canterbury Road
Roselands NSW 2196
Australia

+61280213517

Frequently bought together

Key applications

  • Measuring length with the 0-120mm ruler
  • Measuring hole diameters from 2mm to 15mm
  • Measuring clearance space from 1mm to 15mm
  • Building inspection and construction site measurement
  • Photographing measurements for inspection reports

Measuring gauge only, not a test instrument. The hole diameter gauge reads 2mm to 15mm and the clearance gauge reads 1mm to 15mm, so anything outside those ranges cannot be measured with this tool. While the surface of the Black Ops Series tools is hard-wearing, scratching can expose the silver steel underneath through interaction with other tools or rough surfaces. The back face may show slight imperfections and edges may reveal the metal underneath. For cleaning, wipe with isopropyl alcohol or turps.

Technical Specifications

Tool Type3 in 1 taper gauge - length, hole diameter and clearance
SeriesBlack Ops Series
MaterialHardened 420 stainless steel
FinishBlack surface coat
Blade ConfigurationDual blade
Ruler Range0-120mm
Ruler Length120 mm
Ruler Graduation0.5 mm
Hole Diameter Gauge2-15mm
Clearance Range1-15mm
Overall Length144 mm
Overall Width16mm
Overall Thickness1.2mm
Country of ManufactureAustralia
No technical data sheet is published for this tool. The figures above are the manufacturer's published specification list.

Why trade professionals choose Site Inspector

Site Inspector gauges are pocket sized measurement tools for waterproofers, tilers and building inspectors who need to verify a detail rather than eyeball it. The range covers fillet and bond breaker sizing, taper and gap checking, and quick multi-tool measurement on site, supplied to the Australian trade. Small enough to carry every day, and just as useful whether you are installing the system or signing it off.

Shop all Site Inspector