Pool System Build-Up
- 1 Concrete Substrate
- 2 Crack Repair (if required)
- 3 ACTFLEX FLEXPLUS
- 4 ACTFLEX HYDROPLUG
- 5 ACTFLEX AT MESH
- 6 ACTFLEX 988 CWP (2 Coats)
- 7 Tile Adhesive
- 8 Pool Finish
Flood Test Balloon
$28.00
ACTFLEX 400 CLEAR Waterproofing Membrane
$66.00
Innovative Tools 230mm FC Sheeting Puddle Flange Recess Kit
$504.00
Soudal T-Rex Crystal
$17.85
Puddle Pro 90mm Puddle Flange
$15.00
Puddle Pro 100mm Puddle Flange
$15.00
BAT Spike Roller 21mm x 500mm
$55.00
ACTFLEX 400 CLEAR Temporary Leak Repair Kit For Leaking Bathrooms & Balconies
$94.35


The two detailing tapes for PREFLEX 3000. NS Tape for concealed laps, S Tape for exposed edges.
PREFLEX 3000 tapes close the laps and details on the PREFLEX 3000 pre-applied HDPE membrane. Unsanded NS Tape is double-sided and sits under the next sheet. Sanded S Tape has an adhesive underside and a sand-finished top for details that stay exposed to the fresh concrete.
What it's for
Why waterproofers buy it
Specs
Variants: Unsanded (NS Tape, double-sided) and Sanded (S Tape, sand-finished top).
Not for
NS Tape must never stay exposed to fresh concrete or stand in for S Tape at an exposed detail. Surfaces clean and dry before closing. No screws or nails through any lap zone.
Pickup available at The Waterproofing Shop
Usually ready in 24 hours

PREFLEX 3000 Detailing Tape
Unsanded
The Waterproofing Shop
22/872 Canterbury Road
Roselands NSW 2196
Australia

Correct application makes all the difference.
PREFLEX 3000 NS Tape must never remain exposed to fresh concrete - it is a concealed tape only, and must never be substituted for PREFLEX 3000 S Tape at an exposed detail. No NS Tape may be left exposed beyond a patch edge, and the pre-pour release cannot be signed off while any NS Tape is exposed. Selvedges and receiving surfaces must be clean and dry before closing, and standing water, mud and frost must not be trapped beneath laps. No screws, nails or washers through field sheets or any adhesive lap zone.
| Product Type | PREFLEX 3000 NS Tape, the double-sided seam and detail tape of the PREFLEX 3000 system |
| Function | Concealed side and end laps, transitions and detailing where the next sheet bonds over it |
| Face | Double-sided, no sand finish |
| Exposure Limit | Must never remain exposed to fresh concrete; it is a concealed tape only |
| Substitution | Must never be substituted for PREFLEX 3000 S Tape at an exposed detail |
| Companion Tape | PREFLEX 3000 S Tape, adhesive underside with a sand-finished top, for exposed terminations, edge sealing, circular corner pieces and repair sealing |
| Repair Use | Bonds PREFLEX 3000 patches for damage greater than 12 mm, with the patch extending at least 150 mm beyond the damage in every direction |
| Parent System | PREFLEX 3000 pre-applied fully bonded HDPE waterproofing membrane, 1.7 mm finished thickness |
| Installation Reference | PREFLEX 3000 Installation Manual and the applicable FORSPEC Waterproofing Specification |
Before
After
Gold Coast, QLD
Before
After
Sydney, NSW
Before
After
Perth, WA
Before
After
Melbourne, VIC
Brisbane, QLD
Step-by-step from prep to top coat. Filmed on the tools, not in a studio.

We supply premium waterproofing products backed by expert advice, fast service and real-world experience.
PREFLEX 3000 Detailing Tape is a high-performance unsanded double-sided tape engineered specifically for the PREFLEX 3000 pre-applied HDPE sheet membrane system. Used at overlaps, terminations, and vertical-to-horizontal transitions.
The standard PREFLEX 3000 membrane has a sand layer for mechanical interlock with concrete. The detailing tape omits the sand to allow direct bonding at lap edges and terminations - giving the cleanest possible weld at critical joins.
Applied at PREFLEX 3000 sheet overlaps, around penetrations (pipe collars, drains), at the perimeter terminations of the membrane, and at vertical-to-horizontal transitions where two pieces of PREFLEX meet at right angles.
PREFLEX 3000 Detailing Tape is engineered specifically for the PREFLEX 3000 system. For other membrane systems use the matched detailing tape from that system (FLEXTAPE for liquid membranes, SA TAPE for sheet detail work).
Double-sided heat-reactive adhesive layer designed for sealed laps in tight areas. Refer to the PREFLEX 3000 installation manual for exact dimensions and roll specifications.