Dry-Treat Alkaline Cleaner 1kg
Looking for an effective alkaline cleaner for your construction projects? Look no further than DryTreat Alkaline Cleaner. With its powerful formula, this cleaner is designed to tackle tough stains, grease, and grime on various surfaces. It offers exceptional cleaning power while being safe for use on a wide range of materials. DryTreat Alkaline Cleaner is a reliable solution for both residential and commercial construction sites, providing outstanding results and leaving surfaces looking fresh and revitalized. Whether it's cleaning concrete, tiles, stone, or other surfaces, DryTreat Alkaline Cleaner is your go-to choice.
Triple action foaming cleaner - oxygen, alkaline and detergent booster, pH approx 11
Safe on acid sensitive, calcite based stones such as marble and limestone
100% powder concentrate - one 1kg bottle cleans up to 46 m2
7-Day Money BackGuarantee
Fast DispatchNext Business Day
Expert Advice(02) 8021 3517
Secure CheckoutSSL EncryptedPickup available at The Waterproofing Shop
Usually ready in 24 hours
Dry-Treat Alkaline Cleaner 1kg
The Waterproofing Shop
22/872 Canterbury Road
Roselands NSW 2196
Australia
How to Use
Technical Specifications
Product Files
Frequently bought together
Technical overview
Key applications
- Patios
- Building facades
- Decks
- Cladding
- Garages
- Driveways
- Eating and entertaining areas
- Poultice removal of heavy, old, dried-in stains from countertops
- Cleaning artificial turf
Surface suitability
- All natural stone, including acid sensitive, calcite based stones such as marble and limestone
- Porcelain, ceramic and clay tile
- Brick, masonry, concrete and grout
- Vinyl and unfinished wood (with no stain, oil or other coatings)
- Artificial turf
- All surfaces (surface temperature 5-35C, swept or vacuumed free of loose dust and dirt, thoroughly wetted before the solution is applied)
Always test on a small area first and allow a 24-hour cure time to determine ease of application and the desired result. Apply only when the surface temperature is between 5C and 35C. Do not allow the solution to dry on the surface - clean large areas in sections and avoid applying in windy conditions. Once the solution has been mixed it must NOT be stored in a sealed container, or the container may rupture and cause injury. Only suitable on unfinished wood with no stain, oil or other coatings. The powder is hygroscopic and absorbs moisture from the air, so keep containers well sealed and tightly closed. DANGER: harmful if swallowed, causes skin irritation, causes serious eye damage. Wear protective gloves, eye protection and face protection. Do not eat, drink or smoke when using this product.
Calculate your coverage
You will need:
Dry-Treat Alkaline Cleaner 1kg
1kg bottle
Total coverage: 0 m²
This is an estimate only. Add 10% for wastage.
Technical Specifications
| Product Type | 100% powder concentrate, heavy duty cleaner |
| Action | Triple action foaming - oxygen, alkaline and detergent booster |
| pH | Approximately 11 for fresh product |
| Chemistry | Sodium bicarbonate, percarbonate, sodium lauryl sulfate, sodium hydroxide, sodium disilicate |
| VOC Content | Less than 5 g/L (calculated) |
| Dilution | One third of a bottle per approximately 8 litres of clean, warm water |
| Dwell Time | 3 minutes; do not allow the solution to dry on the surface |
| Agitation | White nylon scrub pad or brush |
| Rinse | Rinse the surface thoroughly with clean water |
| Coverage | One 2.2 lb (1kg) container cleans up to 46 m2 |
| Application Temperature | 5-35C surface temperature |
| Poultice Method | Stiff paste mixed with a little water, left 24 hours, for stained areas up to approximately eight inches in diameter |
| Biodegradability | Hyper-biodegradable, decomposes quickly into oxygen and natural minerals |
| Green Rating | Qualifies for LEED 2009 IEQ Credit 3.3 Green Cleaning, 1 point |
| Pack Size | 2.2 lb (1kg) bottle |
| Storage | Hygroscopic - keep containers well sealed and tightly closed |
| Mixed Solution | Must NOT be stored in a sealed container, the container may rupture and cause injury |
| Hazard Classification | DANGER - harmful if swallowed, causes skin irritation, causes serious eye damage |
| Country of Manufacture | Made in the USA with globally sourced materials |
| Source Document | Product Specification Sheet Rev. 10.20 |
Frequently asked questions
-
Where is Alkaline Cleaner used?
CompatibilityHeavy-duty cleaning + poultice base for all natural stone (including acid-sensitive marble, limestone), porcelain/ceramic tile, brick, masonry, concrete, grout, vinyl, and unfinished wood. Also used as an acid neutraliser.
-
What's the triple action?
PerformanceOxygen + alkaline + detergent in one product. Removes oil, grease, mold, leaf stains, food and beverage stains. Coverage up to 46 m² per kg of product.
-
How is it diluted?
Installation1/3 bottle (~2.5oz / 1 blue scoop) per 8L warm water - same ratio works for both general cleaning and acid neutralisation.
-
Application method?
CompatibilityWet the surface, apply diluted solution, allow 3-minute dwell, scrub with white nylon pad, then rinse with clean water. Safe on the most sensitive natural stones.
-
Safety profile?
CompliancepH approximately 11 (alkaline). DANGER - harmful if swallowed; causes skin and serious eye damage. Wear gloves and eye protection during use.
Why trade professionals choose Stain Proof
Stain Proof, also sold under the Dry Treat name, is a stone and masonry protection range built around impregnating sealers that soak into the surface instead of forming a film over it. The line covers solvent carried and waterborne sealers for natural stone, porcelain, quartz, pavers, concrete and grout, plus colour enhancing options and the acid, alkaline and daily cleaners used to prepare and maintain sealed surfaces. Supplied to the Australian trade through The Waterproofing Shop, including seal, clean and maintain packs that cover a whole job in one order.
Shop all Stain ProofMore from The Waterproofing Shop
Read up on the systems, or come and learn them hands on with our trainers.
