
Schomburg AQUAFIN-F 12kg Rising Damp Liquid
Liquid injection for rising damp in masonry. Pour it in, no pressure needed. WTA tested up to 95% moisture penetration.
Schomburg AQUAFIN-F is a silicification liquid for retroactive horizontal barriers. It is ready to use and comes in a 12 kg canister. Danger: it causes severe skin burns and eye damage, so read the SDS and gear up.
Where to use it
- As a horizontal barrier against rising damp in masonry work
- Pressureless injection through a funnel with pressure plug, or low pressure injection (under 10 bar) with packers
- Absorbent natural stone masonry. Place the holes in the stone. In dense quarry stone, place them in the joints
Why waterproofers buy it
- Tested and certified to WTA guidelines up to 95% moisture penetration
- Hydrophobic and constricting. Prevents capillary water transport
- Ready to use, solvent free, vapour permeable
- High penetration depth
- 24 months in the original canister, stored frost free, cool and dry
Coverage
Approx. 15 kg per m² of masonry cross section.
How it goes in
Drill 30 mm holes about 10 to 12.5 cm apart at 30° to 45°. Depth is about 2 cm (pressureless) or 5 cm (low pressure) less than the wall thickness. Clear the drilling dust. Fill until the substrate is completely saturated, then backfill with ASOCRET-BM or seal with a suitable cement based mortar. Substrate temperature 5 °C to 30 °C.
Not for
Exposed surfaces such as concrete, masonry work and plaster. Walls over 60 cm thick need double sided injection or pressure injection. Check moisture and salts first.
Pickup currently unavailable at The Waterproofing Shop

Schomburg AQUAFIN-F 12kg Rising Damp Liquid
The Waterproofing Shop
22/872 Canterbury Road
Roselands NSW 2196
Australia
Product Details
How to Use
Technical Specifications

Frequently bought together
Technical overview
Key applications
- Horizontal barrier against rising damp in masonry work
- Pressureless injection against rising damp
- Low pressure injection techniques under 10 bar
- Masonry with moisture penetration up to 95%
- Absorbent natural stone masonry
- Dense quarry stone masonry
- Double-sided injection to masonry over 60 cm thick
Surface suitability
- Masonry work (drill holes set to cover at least one bed joint, and a minimum of 2 bed joints in thicker masonry work)
- Absorbent natural stone masonry (drill holes placed in the stone)
- Dense quarry stone masonry (drill holes placed in the joints)
- Low or non absorbent masonry (drill holes arranged in two levels in the joint area, height offset under 8 cm)
- Masonry work with larger voids, chamber stones, cracks or open joints (pressed out with ASOCRET-BM before drilling)
- Masonry over 60 cm thick (double-sided injection or pressure injection)
AQUAFIN-F is not suitable for exposed surfaces such as concrete, masonry work or plaster; it is an injection product for the masonry cross section, not a surface treatment. Protect surfaces that are not to be treated. The renovation procedure follows WTA technical data sheet 4-10 and preliminary investigations such as moisture balance and salt analysis are generally required before injecting. Apply only at a substrate and application temperature from 5C to 30C. For wall thicknesses over 60 cm use double-sided injection or pressure injection. This product is classified Danger: H314 causes severe skin burns and eye damage. Do not breathe dusts or mists, avoid contact with the eyes and skin, and wear protective gloves of natural latex, polychloroprene or nitrile rubber, protective clothing and safety goggles to DIN EN 166. Keep away from heat and direct sunlight, keep out of the reach of children and do not allow the product to enter the sewer system.
Calculate your coverage
You will need:
Schomburg AQUAFIN-F 12kg Rising Damp Liquid
12kg can
Total coverage: 0 m²
This is an estimate only. Add 10% for wastage.
Technical Specifications
| Product Type | Silicification solution for retroactive horizontal barriers |
| Product Components | Ready to use |
| Base Material | Silane |
| Consistency | Liquid |
| Colour | Colourless |
| Density (spec. weight) | approx. 1.3 g/cm3 |
| Vapour Diffusion | Vapour permeable |
| Action | Hydrophobic and constricting |
| Certification | Tested and certified in accordance with WTA relevant guidelines up to 95% moisture penetration |
| Substrate/Application Temperature | from 5C to 30C |
| Consumption per m of Masonry Cross Section | approx. 15 kg/m2 |
| Drill Hole Diameter | 30 mm |
| Drill Hole Spacing | approx. 10 to 12.5 cm |
| Drill Hole Angle | 30 to 45 degrees of inclination |
| Drill Hole Depth | approx. 2 cm less than the masonry thickness (pressureless) or approx. 5 cm less (low pressure) |
| Low Pressure Injection Limit | under 10 bar |
| pH at 20 C | 12.3 |
| Dynamic Viscosity at 20 C | 4 mPas |
| Density at 20 C | 1.28 g/cm3 |
| Solubility in Water | miscible |
| Packaging | 12 kg canister. Also 30 kg canister, 250 kg drum and 1200 kg IBC |
| Storage | Frost-free, cool and dry place |
| Shelf Life | 24 months in the original canister |
| Hazard Classification | Danger, GHS05. Skin Corr. 1A H314 causes severe skin burns and eye damage, Eye Dam. 1 H318 causes serious eye damage |
| * Schomburg publishes these as product characteristic values. Only the WTA conformity is stated as tested and certified; no accredited test report number is quoted in the TDS | |
Frequently asked questions
-
What is AQUAFIN-F used for?
ApplicationAQUAFIN-F is a silane-based liquid used to create a retrospective horizontal damp-proof course in masonry. It is applied by pouring or low-pressure injection into pre-drilled holes.
-
How much AQUAFIN-F do I need?
Coverage & CoatsApproximately 15 kg per m² of wall cross-section. For a typical 360 mm thick wall, that works out to about 5.5 kg per linear metre of wall.
-
What masonry types is it suitable for?
CompatibilityIt is effective on brick, stone, concrete and mixed masonry up to 95% moisture saturation, which is why it is widely used on heritage and modern buildings alike.
-
Does AQUAFIN-F need to be mixed?
ApplicationNo. It is a ready-to-use liquid. Substrate and material temperature should be between 5°C and 30°C during application.
-
Is AQUAFIN-F safe to use indoors?
SafetyYes. The product is solvent-free and vapour-permeable, so treated walls continue to breathe. Always follow the SDS for ventilation and PPE guidance.
Why trade professionals choose Schomburg
Schomburg is a German building chemicals brand supplied to the Australian trade, covering rising damp treatment, screeds, repair mortar and tile adhesive. The range stocked here runs from the AQUAFIN-F and AQUAFIN-i380 damp course products through to SOLOPLAN-30 self-levelling compound, ASO-SEM engineered screed, ASOCRET5/40 repair mortar and MONOFLEX-XL tile adhesive. It is a practical selection for remedial and preparation work, where getting the substrate right decides whether the finished floor or wall holds up.
Shop all SchomburgMore from The Waterproofing Shop
Read up on the systems, or come and learn them hands on with our trainers.







