When structural integrity is non-negotiable, the solution is clear: PROBOND 1100PS – a two-component, high-performance epoxy paste designed for demanding repairs, bonding, and anchoring tasks.
What is PROBOND 1100PS?
A structural adhesive formulated to restore, reinforce, and seal concrete, masonry, and other substrates—whether horizontal or vertical. It even meets AS/NZS4020 standards, making it safe for use with potable drinking water after curing.
| Property | Value |
| Working Time | 90 mins @ 4°C |
| Gel Time (60g) | 25 min |
| Tack-Free Time (23°C) | 3–5 hours |
| Tack-Free Time (40°C) | 20 mins |
| Tensile Strength (ASTM D638-14) | 29.02 MPa |
| Compressive Strength (ASTM D695-15) | 55.2 MPa |
| Flexural Strength (ASTM D790-17) | 35.37 MPa |
| Shrinkage on Cure | 0.2% |
| Bond Strength to Hardened Concrete (2 days) | 15.6 MPa |
| Bond Strength to Hardened Concrete (14 days) | 20.1 MPa |
| Heat Deflection Temperature | 49°C (120°F) |
| Service Temperature (After Curing) | -7°C to 50°C |
| Minimum Curing Time | 6 hrs @ 24°C / 2 hrs @ 30°C |
| Application Temperature Range | 5°C to 35°C |
| Shelf Life | 24 months (in original packaging) |
Where You'll Use It
- Crack repair (3–20mm wide)
- Bonding new concrete to old
- Epoxy mortar binding
- High friction surface treatments (HFST)
- Anchoring bolts and rebar
- Spall patches and void filling
- Termination filler under sheet membrane systems
Key Features
- Rapid cure for fast project turnaround
- Non-toxic after curing—suitable for water infrastructure
- Bonds almost anything: concrete, wood, metal, stone, and more
- Can be sanded, coated, or overlaid once cured
- Thin, impermeable post-cure barrier
Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.