ARDEX WPM 909 Trafficable Waterproofing Membrane 15L

Sale price$300.00
or 4 interest-free payments with

Water-based trafficable membrane with a P5 slip rating and no extra aggregate. For rooftops, podiums and walkways.

ARDEX WPM 909 is a water-based, single component acrylic membrane for pedestrian trafficable areas. It is ready to use. It has excellent UV resistance, so it suits exposed environments.

Where to use it

  • Rooftops
  • Podiums
  • Walkways
  • Pedestrian trafficable environments, light to medium traffic

Why waterproofers buy it

  • Compliant to AS4654
  • Slip rated P5 wet (AS4586-2013 Appendix A) and D1 dry, with no additional aggregate required
  • Excellent UV resistance and abrasion resistance
  • Single component, ready to use, low odour
  • Brush or roller, two coats minimum
  • Recoat in generally 2 to 4 hours
  • Pedestrian traffic after 24 to 48 hours
  • Clean up with water and detergent before it dries

Coverage

15L drum: 8 to 9 m² over two coats. Apply 0.9mm wet film per coat to reach 1.0mm total dry film. Use three coats at entry and exit points and other higher traffic areas.

Not for

Vehicle or heavy equipment traffic. Below 10°C or above 35°C. When rain is imminent. Do not add solvent or water.

All times at 23°C and 50% RH.

P5 wet pendulum slip rating with no additional aggregate required
Compliant to AS4654, Class II elongation on an accredited AS 4654.1 test report
Single component and ready to use, low odour and easy to clean

7-Day Money Back 7-Day Money BackGuarantee
Fast Dispatch Fast DispatchNext Business Day
Expert Advice Expert Advice(02) 8021 3517
Secure Checkout Secure CheckoutSSL Encrypted
Get it — —

Pickup available at The Waterproofing Shop

Usually ready in 24 hours

ARDEX WPM 909 15L water-based acrylic trafficable waterproofing membrane with UV resistance, slip resistance, and excellent cleanability.

ARDEX WPM 909 Trafficable Waterproofing Membrane 15L

The Waterproofing Shop

Pickup available, usually ready in 24 hours

22/872 Canterbury Road
Roselands NSW 2196
Australia

+61280213517

Frequently bought together

Technical overview

ARDEX WPM 909 is a water-based single component acrylic membrane designed for pedestrian trafficable environments such as rooftops, podiums and walkways. It is stirred, then applied in two coats minimum by brush or roller over a primed substrate at 0.9mm minimum wet film thickness per coat, for a total 1.0mm dry film thickness. The TDS states it is compliant to AS4654, and that is backed by an ISO/IEC 17025 accredited XTec Gen test report (215-4 AS4654.1-2012) returning Class II elongation at break of 164%, plus a NATA accredited Safe Environments slip report (R29586) giving P5 wet pendulum. Colour, form, solids, hardness, specific gravity, service temperature and VOC are ARDEX nominal values with no test report quoted.

Key applications

  • Rooftops
  • Podiums
  • Walkways
  • Pedestrian trafficable environments
  • Exposed environments requiring UV resistance
  • Areas requiring anti-slip performance and abrasion resistance
  • Under DTA BOSS tiling pedestals (paver pads) on the cured membrane

Surface suitability

  • Concrete (new concrete cured a minimum of 28 days, prepared and primed)
  • Render (new render cured a minimum of 7 days, prepared and primed)
  • Screed (new screed cured a minimum of 7 days, prepared and primed)
  • Masonry (primed with a minimum two coats of ARDEX WPM 300 where moisture content exceeds 80% relative humidity)

Designed for light to medium pedestrian traffic only. Not suited for vehicle or heavy equipment type traffic. Do not apply if ambient or substrate temperature is below 10C or above 35C. Do not add solvent or water to the product. Do not apply if rain is imminent. New concrete must be cured a minimum of 28 days and new render or screed a minimum of 7 days before application commences. Where masonry or concrete substrate moisture content is greater than 80% relative humidity (ASTM F2170) or exceeds 15g/m2/24hrs (ASTM F1869), a minimum two coats of ARDEX WPM 300 (HydrEpoxy) must be the nominated primer. This is a hazardous chemical: it may cause cancer, is suspected of causing genetic defects, may cause an allergic skin reaction and causes serious eye irritation. Wear protective gloves, protective clothing, eye protection and face protection, and ensure adequate ventilation.

Technical Specifications

Membrane ClassificationWater-based single component acrylic trafficable membrane
ColourLight grey*
FormMedium viscosity liquid*
Solids Content53%*
Shore Hardness A90*
Specific Gravity1.19g/cm3*
Service Temperature0C to 80C*
Tensile Strength (Min)5.03 MPa (AS4654.1 Appendix A)
Elongation at BreakClass II, 164% (AS 4654.1 Appendix A, XTec Gen Report 215-4)
Bond Strength24.65 N (ASTM C794)
Abrasion Resistance, TrafficablePass, 0.105mm (AS1580.403.2)
Acceptance of Cyclic MovementPass, no failure (AS4654.1 Appendix B)
DurabilityPass (AS4654.1 Table A4)
Durability, UV exposurePass (AS4654.1)
Water Vapour Transmission1.41g/m2/24 hours (ASTM E96)
VOC Content70g/L*
Slip Resistance, Wet Pendulum Slider 96P5 (AS4586-2013 Appendix A, Report R29586)
Slip Resistance, Wet Pendulum Slider 55P5 (AS4586-2013 Appendix A)
Slip Resistance, Dry Floor Friction Slider 96D1 (AS4586-2013 Appendix B)
Wet Film Thickness0.9mm minimum per coat
Dry Film Thickness1.0mm total after two coat application
CoatsTwo minimum, three coats recommended for higher pedestrian traffic areas
Recoat Time2 to 4 hours at 23C/50% R.H.
Pedestrian Traffic24 to 48 hours after final coat at 23C/50% R.H.
Application TemperatureAbove 10C and below 35C, ambient and substrate
Coverage8m2 to 9m2 per pail, two coat application
Packaging15L drum
Shelf Life12 months in original unopened packaging, dry, at 23C and 50% R.H.*
* Nominal ARDEX values, not accredited test results

What's Included

  • 15L pail of ARDEX WPM 909 ready-to-use water-based acrylic trafficable waterproofing membrane.
ARDEX WPM 909 Trafficable Waterproofing Membrane 15L

Frequently asked questions

View all FAQs
  • Is this product UV-stable above water?
    Performance

    Designed for underwater use only — direct sunlight exposure may cause fading, peeling or chalking. Apply Omega Omethane 343 topcoat if exposed sections are a concern.

  • How do I use Litonet Gel Evo?
    Application

    Apply neat with a brush or pad to dry residue. Allow 20-30 minutes contact time (do not let dry fully). Agitate with stiff brush and rinse with clean water.

  • Which surfaces is it safe on?
    Compatibility

    Most glazed ceramic, porcelain, glass mosaic and tough natural stone. Always spot-test on porous stones, marble, or polished surfaces before full use.

  • Will it remove cured epoxy grout?
    Performance

    Most effective on epoxy grout residue removed within 48 hours of grouting. Heavily cured residue may require mechanical assistance or specialist removers.

Why trade professionals choose Ardex

Ardex is a global leader in high-performance building products, trusted by Australian trade professionals. The range spans liquid and sheet waterproofing membranes, primers, sealers, screeds and repair systems, engineered for lasting results on residential and commercial projects.

Shop all Ardex