Forspec PROBOND 1100 High Strength Epoxy Paste 10kg kit comprising Part A and Part B for high-strength structural bonding, concrete repair, anchoring, and crack filling applications.

Probond 1100 High Strength Epoxy Paste 10kg Kit

Sale price$189.00

Two-part epoxy repair paste for structural bonding. High strength for concrete and masonry.

PROBOND 1100 is a two-part epoxy adhesive paste for bonding and repairing concrete, masonry, stone and metal. It reaches 40 MPa compressive strength and 8 MPa tensile strength, ideal for structural applications where lasting bond is critical.

Where to use it

  • Repairing spalled concrete edges and structural elements
  • Fixing dowels, anchor bolts and threaded rods in concrete
  • Bonding masonry units where mortar has failed
  • Patching concrete cracks and damage before waterproofing

Why waterproofers buy it

  • Two-part system. High strength, 40 MPa compressive, 8 MPa tensile
  • Sticks to damp concrete and masonry without primer
  • Pot life 30 minutes. Full strength in 24 hours
  • Trowel-friendly. Easy to shape and finish
  • Waterproof when cured. Sealed for durability

Coverage

10kg kit covers approximately 2 to 3 m² at 3mm thickness.

Not for

Areas subject to continuous water immersion, applications requiring flexibility, or bonds requiring cure times under 24 hours.

Bond strength to hardened concrete of 20.1 MPa at 14 days
Non-sag paste holds position on vertical and overhead work without slump
Fills cracks and voids 3mm to 20mm wide, minimum cure in 6 hours at 24C
Choose your size
1
7-Day ReturnsMoney back
Fast DispatchNext business day
Expert Advice(02) 8021 3517
Secure CheckoutSSL encrypted
Accessories you might need
Technical overview
  • PROBOND 1100 is a two-part, solvent-free structural epoxy paste adhesive with high strength and low modulus.
  • It is used for crack and structural repair, for bonding freshly mixed concrete to hardened concrete on vertical and horizontal surfaces, for anchoring bolts and dowels, and as the specified adhesive for FORSPEC EXPANDOFLEX JOINT TAPE.
  • It fills cracks and voids from 3mm to 20mm wide and develops bond strength to hardened concrete of 20.1 MPa at 14 days.
  • No accredited certificate is currently held on file for PROBOND 1100 and all performance values are published as typical R&D characteristic values against their stated test method.
  • The previous AS/NZS 4020 potable water claim is withheld pending certification.
Key applications
  • Structural crack repair and void filling in concrete, masonry and other substrates, 3mm to 20mm in width
  • Bonding freshly mixed concrete to hardened concrete on vertical and horizontal surfaces
  • Bedding and capping adhesive for FORSPEC EXPANDOFLEX JOINT TAPE, including recessed saw-cut installation
  • Port setting and crack capping in the FORSPEC epoxy injection procedure
  • Anchoring adhesive for bolts and dowels
  • Binder for epoxy mortar and for spall patch repair with kiln-dried aggregate
  • Selected FORSPEC sheet-applied waterproofing membrane terminations
  • Binder for high friction surface treatments on concrete and asphalt
  • Patching holes and crevices in concrete, and repair adhesive for metal, brick, timber, stone and block
Surface suitability
  • Concrete (minimum 28 days old, clean, sound, completely dry and mechanically profiled)
  • Masonry and brickwork (clean, sound and dry, all bond-inhibiting contaminants removed)
  • Smooth surfaces (mechanically roughened with a wire brush or abrasive paper before application)
  • Asphalt (as the binder for high friction surface treatments)
  • Metal, brick, timber, stone and block (as a repair adhesive, both surfaces sound and free of contaminants)

Not for use in contact with potable water - the AS/NZS 4020 claim is withheld pending certification. Not a waterproofing membrane, it seals and bonds within a system and does not waterproof an area. Not for application to damp, wet or frosted substrates, or where moisture is present in the crack or void. Not for cracks narrower than 3mm. Not for new concrete less than 28 days old. Do not apply below 5C or above 35C substrate and ambient temperature. Do not dilute, extend, re-temper or add solvent under any circumstances. Do not leave the full mixed kit standing confined in the mixing container, the reaction is exothermic. Do not apply to the central flexible zone of FORSPEC EXPANDOFLEX JOINT TAPE. Not designed for structural load transfer across a movement joint. Discard mixed material that has begun to gel, it cannot be reworked. Both Part A and Part B are classified HAZARDOUS CHEMICAL and DANGEROUS GOODS, signal word DANGER - wear impermeable nitrile gloves, eye and face protection and long-sleeved clothing, ensure good airflow and read both Safety Data Sheets before use.

Shipping and returns
Dispatched same or next business day from Roselands NSW, with fast delivery Australia wide. 7-day returns on unused stock in original packaging (20% restocking fee).
Technical documents
Probond 1100 High Strength Epoxy Paste 10kg Kit
PROBOND 1100 - 10kg Kit
$189.00
1

Why waterproofers use PROBOND 1100

01

Bond strength to hardened concrete of 20.1 MPa at 14 days

02

Non-sag paste holds position on vertical and overhead work without slump

03

Fills cracks and voids 3mm to 20mm wide, minimum cure in 6 hours at 24C

How to apply PROBOND 1100

Step by step from the technical data sheet. Always read the full TDS before you start.

  1. 1

    Confirm the concrete is a minimum of 28 days old and that the substrate is clean, sound, completely dry and free of moisture in the crack or void

  2. 2

    Remove all dirt, dust, laitance, curing compounds, oils, grease, wax, surface sealers and coatings by mechanical means, then vacuum thoroughly

  3. 3

    Establish a roughened profile by rough-grinding, scarifying, bush hammering or equivalent mechanical preparation

  4. 4

    Mechanically roughen smooth surfaces with a wire brush or abrasive paper

  5. 5

    Where the product is bonding two surfaces, confirm both are sound and free of dust, dirt, grease, wax and oil

  6. 6

    Pre-condition both components to 21C to 24C before mixing

  7. 7

    Pour equal parts of Part A and Part B into a clean pail

  8. 8

    Mix with a slow-speed mechanical mixer at 300 to 400 rpm using a helical or paddle blade

  9. 9

    Mix continuously for 2 to 3 minutes, scraping the sides and base, until a uniform amber colour is achieved with no streaks

  10. 10

    Mix only the quantity that can be placed within the working time for the prevailing site temperature and apply immediately

  11. 11

    Inject or gravity-feed into cracks and voids 3mm to 20mm wide, ensuring the adhesive fully penetrates the void

  12. 12

    Maintain a minimum adhesive depth of 12mm in gravity-feed repairs

  13. 13

    For larger voids fill in successive layers to avoid air entrapment, and insert backer rod or sand where adhesive loss is a risk

  14. 14

    For spall repair, cut around the spall into sound concrete, grind to a consistent 13mm to 16mm depth and never feather the edge

  15. 15

    Press the mixed material firmly into the spall with a trowel or spatula, overfill slightly, then trowel smooth and flush

  16. 16

    For anchoring, part-fill the cleaned hole, insert the bolt or dowel with a slow twisting motion and remove excess before it cures

  17. 17

    Allow to cure fully before grinding, coating or loading - minimum cure 6 hours at 24C, anchors 24 to 48 hours

  18. 18

    Clean tools with FORSPEC EPOXY CLEANER while the material is uncured and record batch numbers, temperatures and cure periods for the project quality records

Specifications

Every figure from the technical data sheet, in one table.

Property
Value
Viscosity
2,210 cps at 25C*
Product Type
Two-component solvent-free structural epoxy paste adhesive
Mixing Ratio
1:1, Part A to Part B
Colour
Part A clear to light amber, Part B amber, mixed amber
Consistency
Non-sag paste
Packaging
600 mL dual cartridge, 10 kg and 20 kg kits
Tensile Strength
29.02 MPa (ASTM D638-14)*
Compressive Strength
55.2 MPa (ASTM D695-15)*
Flexural Strength
35.37 MPa (ASTM D790-17)*
Bond Strength to Hardened Concrete
15.6 MPa at 2 days, 20.1 MPa at 14 days*
Shrinkage on Cure
0.2%*
Heat Deflection Temperature
49C*
Gel Time
25 minutes (60 g mass)*
Tack Free Time
3 to 5 hours at 23C*
Working Time
Approx. 40 to 45 minutes at 25C, 50% RH*
Working Time by Temperature
90 minutes at 4C, 45 minutes at 24C, 20 minutes at 40C*
Minimum Cure Time
10 hours at 10C, 6 hours at 24C, 2 hours at 30C*
Anchor Loading
24 to 48 hours, temperature dependent
Crack Width Range
3 to 20 mm
Minimum Adhesive Depth, Gravity Feed
12 mm
Application Temperature
+5C to +35C
Service Temperature After Curing
-7C to +50C
Shelf Life
24 months unopened, stored at 5C to 35C*
Hazard Classification
Both parts HAZARDOUS CHEMICAL and DANGEROUS GOODS under the WHS Regulations and the ADG Code, signal word DANGER (Chemwatch 5689-04 Part A, 5689-05 Part B)
* Typical Forspec R&D characteristic values - no accredited certificate is held for this product
Download the full technical data sheet

Customer reviews

Common questions

View all FAQs
  • What is the difference between ProBond 1100 and 1100PS?

    ProBond 1100 and 1100PS share the same chemistry - they are the same epoxy paste sold in different formats. 1100PS is supplied in dual cartridges with static mixer; 1100 (10kg paste) is supplied as a bulk pail for larger jobs.

  • When should I use the 10kg kit?

    Use the 10kg paste kit when you have large-volume bonding work that would consume many dual cartridges, or when you need to dose the epoxy by mass for specific applications (anchoring sets, custom mix ratios).

  • How is the 10kg paste applied?

    Mix Part A and Part B 1:1 by mass or volume per the supplied instructions, then apply by trowel, putty knife, or pump per the application. Pot life is approximately 45 minutes after mixing - work in manageable batches.

  • Same compliance as 1100PS?

    Yes. The 1100 10kg paste has identical chemistry and certifications as 1100PS, including AS/NZS 4020 potable water contact compliance. 55.2 MPa compressive, 20.1 MPa bond strength at 14 days.

  • Where is the 10kg kit typically used?

    Used for large structural bonding projects: precast panel anchoring, large crack repair, bridge work, structural retrofits, and any application where the dual-cartridge format would be impractical due to volume.

Ready to order?

1

Dispatched same or next business day from Roselands NSW. Questions? Call the team on (02) 8021 3517.